Jump to content

Sign in to follow this  
Guest scumbag

WITHDRAWN X2 Audience Auricap 4.7uf 400v NEW

Recommended Posts

Guest scumbag

Item: WITHDRAWN  X2 Audience Auricap 4.7uf 400v NEW

 

Location: Brisbane

 

Price:  - prefer local pickup but could post at cost (Officeworks is very cheap ATM).

 

Item Condition: Perfect - never used. 

 

Reason for selling: I have a lot of extra speaker stuff that I picked up to experiment with. Need to get rid of some of it.

 

Payment Method: Pickup - Cash, Paypal, COD Only Add 3% if not paying as a friend - if you don't pay as a friend and don't add 3% then I will refund the payment - sorry a bit sick of people ignoring that request.
 
Extra Info

 

Some comments / reviews from the interwebs:

 

"Sound: I find these capacitors to have a pleasantly smooth and clear presentation that is slightly forward if directly compared to bright-ish capacitors like the Jantzen Silver Z-Cap or Silver Gold Z-Cap. The Auricap retrieve enough amibent information that helps to make an orchestra properly placed in a concert hall (recording permitting) and project the image more in the width than in the depth. Overall performance is very satisfactory and has something correct / complete about it. I have added them to my favourites list."

 

"nice detail, speed, musicality, and their sound gives an extra bloom to the sound, which will make them fit well into somewhat cooler-sounding components"


"The balance is perfect, the sound is perfectly neutral, uncoloured. Not even an hint of coloration"


"smoother midrange but a neutral balance through the whole audio frequency spectrum…………..You can say that the Auricap does nothing wrong, but look elsewhere if you are looking for a cap to colour the tonal balance of your system."
 

So I would describe them as neutral veering towards warm. Good detail and image depth. Well made and suitable for use in electronic components and crossovers.

 

TNT review

 

 

 

Pictures:

capacitor_30.jpg

Edited by scumbag

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ssb102
      Item: 4x Fanless ROON ROCK Servers
      Location: Sydney, Hills District
      Price: Varies, see below
      Item Condition: Excellent
      Reason for selling: Surplus!
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      It's 2020 and it's high time i cleared my backlog of projects.
       
      I have FIVE Fanless Roon Rock Boxes for sale.
       
      All totally silent with SSDs running the latest version of ROON ROCK
       
      Small enough to fit on a bookshelf and use far less power than a full PC or laptop so you can really leave them running. 
       
      Your wife/girlfriend/dog/cat wont even notice.
       
       
      3x WYSE Zx0 
      (2 Units) 8GB + Ethernet + Wifi $120 ea
      (1  Unit) 16GB + Ethernet + Wifi $150 ea
       
      (1 Unit left! ) 8GB + Ethernet + Wifi $120 ea
       
       
      1x Dell Optiplex FX160 with 32GB SSD
      $200 $150 PRICE DROP
      Intel Atom platform
      Gigabit Ethernet  (via USB 3.0 adapter, FREE)
      Wifi optional extra
       
      ALL BOOT INSTANTLY AND WORK FLAWLESSLY. 
       
      These SSD sizes are more than adequate to hold the ROON database because with ROON your music is stored elsewhere.
       
      Priced fairly these are an excellent way to get started with ROON.
       
      Reasonable offers considered. Discounts for multiple purchases or pickup.
       
      Lowballers and timewasters will be sent a copy of the Betoota Advocate. 
       
      ARSE mug not included.
       
      Shipping available just DM me for a quote.

      Photos: Advertisements without photos of the actual item will not be approved.
       





    • By Vladas
      Item:
      MASTERSOUND INTEGRATED TUBE AMPLIFIER BOX R
      Parallel Single Ended in "Class A" Integrated - Made in Italy
       
      Power: 2 x 35 Watt
      Tubes complement: 2 x ECC802 - 6 x EL34
      Input: 3 line + Phono MM
      Output: 1 line
      Load imped.: 4-8 ohm
      Bandwidth: 18 hz / 25 khz 0 db
      Output Transformer: MastersounD
      Automatic Bias
      Supplied with remote control - R version
      Negative feedback: 0 db
      Dimensions: 43,6 x 40,9 x 18,5 cm
      Weight: 24 Kg
      Made in Italy
       

      Location:  Frankston VIC 3199
      Price:  $3000 (RRP - $5200)
      Item Condition: Brand New - still in the box
      Reason for selling: Change of financial situation
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
       
      Pure Class A  2x35 Watt PSET (Parallel Set) which is used in the very high end tube
      amplifiers like Aries Cerat $30K USD. This gives you uncompromising power to run in pure class A almost any 89+ db speakers.  Lack of power is Achilles weak spot of most tube amplifiers and I believe PSET is the best solution used by the very high end manufacturers. Legendary Mastersound brand - makes PF100 tube amplifier $50K USD. Fabulous musical EL34 tubes. To my knowledge, this model is absolutely the best value for integrated tube amplifier in that price range; made in Italy but priced similarly to comparable Chinese models. Includes very good phono pre-amplifier - same as in the flagship models.  This is Box R version with remote control (cost $330 AUD extra).
       
      Links below shows additional information about The Box and Mastersound brand in general:
      http://www.mastersoundsas.it/1/reviews_4451773.html
      https://soundapproach.com/mastersound-box-r-integrated-amplifier-class-a.html
      https://www.technologyfactory.eu/en/mastersound/integrated-amplifiers/mastersound-box/a-5384-10000401
      https://forum.audiogon.com/discussions/axpona-2018-integrated-mastersond-box

      Photos: Advertisements without photos of the actual item will not be approved.
       
       
       
       


    • By russell66
      Item: Klipsch Synergy Home Theatre Speakers
      Location: Perth - Kardinya
      Price: $600ono
      Item Condition: Very Good all working well, some minor marks.
      Reason for selling: No Longer Required
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
      Excellent sounding home theatre package. Klipsch are well known for their cinema speaker designs.
       
      Fitting out many cinemas and shows with these speakers.
       
      They excel with soundstage, dynamics and detail.
       
      Package consists of ...
       
      2 x Synergy F10 Floor-standers
      2 X Synergy B20 Bookshelf's
      1 X Synergy C1 Centre
      1 X SW 350 Sub Woofer
       
      Post is available at your cost and risk. 
      Photos: Advertisements without photos of the actual item will not be approved.









    • By fffastfaz
      Item: Chord Shawline USB Cable 1M
      Location: Perth
      Price: $275.00 incl postage
      Item Condition: Brand new
      Reason for selling: No longer required
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Cable is brand new and cost $350.00 
       
      Photos: Advertisements without photos of the actual item will not be approved.


    • By 81Vintage
      Item: Custom Rega Style Turntable, AudioMods Tonearm, IsoDrive PSU
      Location: Tasmania
      Price: $3300 Price Drop $2850 inc shipping Australia Wide, can do a little less if you can collect in person to save packing and freight.
      Item Condition: Excellent, Used
      Reason for selling: New Project/Custom Build
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      This is a complete custom build from the ground up based on a Rega P series design. Raw cost of materials and items was over $6000.
       
      Plynth milled from single block of billet alloy on CNC router (around 15kg) Finished in red automotive paint Followed same dimmensions as a Rega P3 plynth. 5x Maglev feet (tried with 3, 4 and 5 configurations and 5 was the best) IsoKinetic IsoDrive Power Supply with 33/45 speed selection IsoKinetic 25mm Acrylic Platter IsoKinetic IsoSub Groovetracer Machined Subplatter IsoKinetic Phosphor Bronze Bearing Sleeve IsoKinetic Ruby Bearing + Spindle Oil (lifetime supply left in bottle) IsoKinetic Puck/Stabiliser IsoKinetic Red Thing Silicone Belt + Spare New One in Packet IsoKinetic MTB-D Motor Thrust Bearing + Motor Isolation Mod for Premotec Motor Premotec 50hz Synchronous Motor Audiomods Series 4 Tonearm with Series 5 bearing, lift and arm hold. Full VTA Adjustment - no VTA adjuster.  All original weights and headshell weights/spacers included to adjust to any cart. Custom Acrylic Dust Cover to accomodate arm height No cart included, but I did have an Ortofon MC25e on it and it was stunning.  
      *I have covered the hole bottom left corner where a power button would have gone if I didnt use the external motor PSU and controller with a samurai silver coin from WA mint. So the turntable is dubbed "The Samurai"
       
      For interstate buyers, it will be professionally crated and foam lined for shipping with tonearm back in original transport box. Shipping Australia wide with insurance included.
       
      For those that want to know where to from here - my next build will be in the similar vein...but using the MK6 Audiomods tonearm for primary, 200mm monster delrin platter,  ceramic bearing sleeve, larger billet plynth with 2 armboards for future arm addition and external motor and controller.
      Photos: Advertisements without photos of the actual item will not be approved.














×
×
  • Create New...