Jump to content

Sign in to follow this  
TomW

Sydney Audio Club and Grover Notting – in partnership for a great event – August 21st

Recommended Posts

Sydney Audio Club and Grover Notting – in partnership for a great event

 

On August 21st the Sydney Audio Club will partner with Grover Notting for an afternoon of educational talks and music demonstrations.  Frank Hinton is the CEO of Grover Notting, a major designer and manufacturer of studio speakers and equipment and also the Australasia distributor for Merging Technologies of Switzerland. 

 

Frank will bring the Grover Notting Code 1.5s, Code 4s and Code 5s along with a system from their extended bandwidth ‘Mastering Series’ complete with companion ‘Power Plants’.  The overall theme of the Grover Notting presentation will be ‘optimum linearity’. 

 

The main educator from Merging Technologies will bring a multi-channel NADAC and his presentation theme will be ‘high sample rate recording’.   (NADAC website at http://nadac.merging.com/)

 

Frank is also organizing 10-15 of Australasia’s leading audio engineers and producers who will participate at some level to give us some insight into entertainment production and where it’s heading. 

 

Guests welcome, of course!

 

When: Sunday August 21st, from 1:00 PM through to 5:00 PM

 

Venue: The Johnson Hall in the Crows Nest Centre (CNC) at 2 Ernest Place, Crows Nest

The hall has good acoustics, is 180 square metres and will comfortably seat 120+ people. 

The CNC is in a quiet area that is very close to neighbouring cafes and shops.

 

Trains: 12-15 minute easy walk from the St Leonards train station.

 

Parking: all day free parking on Sunday in a large adjoining car park

 

Presented by:

Sydney Audio Club - http://www.sydneyaudioclub.org.au/

Grover Notting - http://www.classicaudiodesigns.com.au/

Merging Technologies - http://www.merging.com/

Edited by TomW

Share this post


Link to post
Share on other sites

THE SUNDAY SYDNEY AUDIO CLUB EVENT
As you are aware we are presenting an event for the Sydney Audio Club on Sunday the 21st August at the Crows Nest Centre, many have indicated the desire to attend. We are in fact working on ensuring this a standout experience, delving into interesting, new and developing areas that are contentious for some and not understood by others. The event has been receiving much promotion and interest amongst audiophiles and their press (StereoNet etc.), we have a note of who will be attending from this group, but I may need to formalise that, if a ceiling on attendance is required.

To recap, there will be two modules the first;
Achieving Optimum Linearity and the rare experience of it – presented by Frank Hinton (Grover Notting).

Then;
High Sample Rate, what is it, how is it produced and experienced – presented by Johan Wadsten (NADAC by Merging), supported by Ross A’hern (Mir Creation).
All technology deployed on the day will be installed, interfaced and managed by Conan Tran.

ATT AUDIO CONTROLS Pty. Ltd.
http://www.attaudiocontrols.com
http://www.classicaudiodesigns.com.au
http://nadac.merging.com
http://www.mircreation.com

Share this post


Link to post
Share on other sites

For customers and club members alike, the insatiable desire for more and better education has become increasing obvious to Frank Hinton of Grover Notting and members of the Sydney Audio Club.  Our 4 hour presentation will consist of two very educational modules presented by some of the audio industries finest:

  • The first module will be Achieving Optimum Linearity and the rare experience of it – presented by Frank Hinton featuring Grover Notting.
  • The second module will be High Sample Rate – what is it, how is it produced and experienced – presented by Johan Wadsten (Merging Switzerland), supported by Ross A’hern (Mir Creation) featuring the NADAC DAC.

 

All technology will be installed and managed by Conan Tran of Merging Technologies technical support in Australia.  The event will be hosted by Tom Waters, President of the Sydney Audio Club.

 

There will be music during and between the presentations.  The music will be selected to supplement the presentations – as an example, we will be presenting DSD 256 music during and after Johan and Ross’s presentation on high sample rate.

 

There will be two breaks.  The first break will be around 2:00 PM, the second around 3:30 PM.  Each break will be approximately 30 minutes.  Tea and coffee will be provided free by the club. 

 

Please note that we intend to keep the technical aspects of the presentations at a high level.  As an example, the intricate details of Nyquist-Shannon sampling theorem will not be explored.  We want the presentations and music experiences to be beneficial to all attendees.

 

We will have Q&A during and after presentations.  Q&A that proves technically involved, lengthy or considered too technical may be deferred to a break, such that all attendees can benefit. 

 

Guests are welcome.  If you are a guest and wish to attend, please let me know by email at tomwaters@sydneyaudioclub.org.au.  This notification is only to attempt to determine an approximate number of attendees – no one will be turned away.

 

When:  Sunday August 21st, from 1:00 PM through to 5:00 PM

 

Venue:  The Johnson Hall in the Crows Nest Centre (CNC) at 2 Ernest Place, Crows Nest

The hall has good acoustics, is 180 square metres and will comfortably seat 120+ people. 

The CNC is in a quiet area that is very close to neighbouring cafes and shops.

 

Trains:  12-15 minute easy walk from the St Leonards train station.

 

Parking:  All day free parking on Sunday in a large adjoining car park

 

Presented by:

Sydney Audio Club - http://www.sydneyaudioclub.org.au/

Grover Notting - http://www.classicaudiodesigns.com.au/

Merging Technologies - http://www.merging.com/

MIR Creation - http://www.mircreation.com/

Edited by TomW

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TomW
      Our January club meeting will be our usual January meeting where we have a system comprised of club member components.  We’ll be featuring reel-to-reel and cassette as well as CD.  Come along to enjoy some great music and great company.  And if you like, feel free to bring your favourite music on R2R or cassette.  Of course, you’re always free to bring the usual CD/SACD and flash drives for our BYO session.
       
      Detail of the system…
       
      Revox A77 Mark IV reel-to-reel (with Dolby B).  We will also have several reels of music (all genres), presented by club member John Way.  Refer to http://www.reeltoreel.de/worldwide/A77DolbyE1.htm and http://en.wikipedia.org/wiki/Revox.
       
      Nakamichi 700 Cassette deck plus music cassettes (all genres), also presented by club member John Way.
      Refer to https://www.hifiengine.com/manual_library/nakamichi/700.shtml
       
      B&W 801 S2 speakers with Ultimate External North Creek X-overs.  Refer to 
      http://www.northcreekmusic.com/B-W_Crossovers/b-w_crossovers.html and http://www.stereophile.com/floorloudspeakers/506/index.html.  Speakers provided by club member Steve Polley.
       
      Classe CP800 preamp – connected to the power amp via Vertere XLR.  Refer to http://www.classeaudio.com/products/cp-800.php and http://www.stereophile.com/content/class233-cp-800-da-preamplifier.  Preamp provided by club member Steve Polley.
       
      Nord ONE NC500 Mono amps.  Refer to https://www.nordacoustics.co.uk/product-page/nord-one-se-up-nc500mb-mono-block-black-single. Amps provided by club member Steve Polley.
       
      Our shiny disc source for our BYO session will be an Oppo BDP-105D multi-format player.  Oppo provided by club member Steve Polley.

      The second half of the music sessions will be our popular BYO.   Members and guests are welcome to offer music to share with us all.  So bring along your favourite music on R2R or cassette if you have some tapes, alternatively CD or USB thumb/flash drives.  Sorry, no vinyl this month.  All we ask is that the music and recordings be interesting.  We'll ask you to tell us a little about the artist/recording before it is played.  Tracks over 6 minutes will be faded out, to give everyone a fair go. 
       
      Whether you are a novice or a seasoned veteran, you will have the opportunity to listen, learn and share your experiences with others.  Feel free to come and hear the capabilities of the system, or to just share the experience with like-minded music lovers in a friendly and relaxed atmosphere.  
       
      Guests are welcome – we are a very friendly club so you don't need to know anyone to join us for an afternoon of fine music and sound.
       
      Venue:  Epping Creative Centre, Dence Park
      Address:  26 Stanley Road, Epping 
      When:  Sunday 20th January 2019
      Doors open 1pm
      Meeting starts at 2pm
       
      Best regards,
      Tom Waters
      President
      Sydney Audio Club
      W: www.sydneyaudioclub.org
      FB: https://www.facebook.com/sydneyaudioclub
      E:   tomwaters@sydneyaudioclub.org.au
    • By chefscuba70
      Hello all,
      I would like to inform every one of the Sydney Audio Club’s upcoming meetings for anyone who may be interested in attending. Each month I will post a copy of our newsletter highlighting who will be presenting at our next gathering. See post below.
      All are welcome, so please post here for more info, or see our website for calender dates, www.sydneyaudioclub.org.au/
      You don't need to know anyone to join us for an afternoon of fine music and sound.
      Hope to see you there.
      Potential Presenters:
      I’ve been a member of the Sydney Audio Club for over a year now and love it and have recently joined the committee in the role as Events Coordinator. This is a joint role with another committee member whose career background is in Pro Audio.
      Together we source and organise Home and Pro audio equipment from Distributors, Retailers, Direct to Market Companies, Representatives and our Members, to showcase their gear for the enjoyment of our members and guests at our monthly meetings held at Dence Park Creative Centre in Epping.
      The Sydney Audio Club offers companies an opportunity to present and demonstrate their equipment to the club. It could be a single piece of kit or an entire system, something new to market or an old favourite. Also we have recently updated our website to list our presenters over the last 12 months in the public area.
      Anyone interested in offering and presenting any gear at our future meetings, feel free to contact myself for further discussions. Meetings are on Sundays and openings are available from Feb 2013.
    • By chefscuba70
      Hi all,
      For anyone interested, your welcome to come along and join us.
      The October 2012 meeting of the Sydney Audio Club sees us once again at Dence Park for an afternoon of fine music and sound and convivial company.
      Each month, the Sydney Audio Club presents the finest in high end audio systems for our members and guests. It's a bit like a private audio show once a month where you can hear and discuss equipment that you might not otherwise have the chance to audition. And you can bring along your own music to test the capabilities of the system or to just share with like-minded music lovers in a friendly and relaxed atmosphere.
      This month we will have a system presented by Steven Spurrier of Studio Connections Australia (refer to http://www.studioconnections.com.au). Studio Connections Australia is the Australian distributor for some highly renowned and respected brands of audio equipment. Their brands include: Genelec, Bricasti Design and Drawmer. (All the equipment on the day will be provided by Studio Connections Australia.)
      This month we will have a system comprising Genelec and Drawmer products.
      The speakers will be the Genelec 8260A and 8240A models (please refer to http://www.genelec.com). Genelec have been manufacturing professional studio monitors since 1978 and have recently introduced home theatre and installation product ranges.
      The Genelec 8260A is a three way active system which combines a coaxial driver (MDC™) with the advanced Genelec Directivity Control Waveguide™ (DCW™), ensuring drivers couple coherently over their full operating bandwidth as well as creating coincident mid-frequency/high frequency point source. (Drivers are 3/4” tweeter, 5” midrange, 10” woofer). The 8260A features an internal digital active crossover, accepting inputs from 32 to 192kHz. Total amplifier power is 390W per speaker.
      The Genelec 8240A is a two way active system which features a flow optimized reflex port that provides solid, clear and articulated low frequencies without compression, distortion or port noises. It is also combined with the Genelec Directivity Control Waveguide™ (DCW™), and has rounded edges and gently curved front and sides of the MDE™ (Minimum Diffraction Enclosure™) enclosure. (Drivers are 3/4” metal dome tweeter, 6.5” woofer). The 8240A also features an internal digital active crossover, accepting inputs from 32 to 192kHz. Total amplifier power is 180W per speaker.
      The Genelec Loudspeaker Manager™ (GLM™) software manages the Genelec DSP signal processing responsible for all loudspeaker functions, such as the crossover filters, driver equalizers, driver position alignment, room response alignment, calibration and equalization related filters as well as distance compensating delays. Carefully designed DSP crossover filters with extremely steep roll-off characteristics feed dedicated power amplifiers for each of the low distortion drivers. The Genelec Loudspeaker Manager (GLM™) control network and software features adjustment of levels, distance delays and flexible room response improvement equalization with the reliable and robust AutoCal™ automated calibration system via the GLM™ control network.
      We will also be featuring the M-Clock Plus AES Grade 1 Master Clock/Dual Sample Rate Converter from Drawmer (http://www.drawmer.com/products/dms/m-clock-plus-master-clock-src.php).
      M-Clock Plus is a high stability master clock generator offering clock rates from 44.1 to 192kHz, coupled to two sample rate converters, which allow material to be re-sampled and synchronised to the selected high precision clock. In addition to the internal clocks, M-Clock Plus can sync to either external word clock or clocks from AES/EBU signals. Precision clock frequency measurement and display indicates the exact frequency of the selected clock, whether internal or external, to an accuracy of 2ppm.
      M-Clock Plus has an external word clock input and an AES11 input which retrieves the clock from an AES audio signal. Each sample rate converter has selectable AES, SPDIF or TOSLINK inputs, with simultaneous AES, SPDIF and TOSLINK outputs. This allows many possibilities for format conversion as well as sample rate conversion. Sample rate converter #2 has inputs on the front panel for easy access. Provides user selectable word length of 16 or 24 bits with automatic dither generation – particularly valuable for 16 bit word lengths at low signal levels. There are 10 word clock outputs - 8 at the rear and 2 at the front for easy access.
      Note: also of interest from Studio Connections Australia are Drawmer's HQ Precision Pre-amp / DAC and the Bricasti M1 DAC – http://www.bricasti.com/m1.html. Neither of these will be on display or available in our meeting however.
      Sources will be all digital this month, sorry no vinyl. Steven will be providing an Audio Alchemy DDS Pro/DTIPro32/DDEV3.0 CD transport, which has both AES/EBU and COAX outputs. We will also have an Oppo BDP-95 player for DVD-A and BluRay discs (provided by a member) for playing members and guests music. Playing SACD discs will be possible but less desirable due to the enforced DA conversion in the player – the signal must be then later reprocessed via ADC which means there is a lot of processing.
      For this meeting, both music sessions will be BYO after Steven’s demonstration session. Members and guests are welcome to offer music to share with us all. So bring along your favourite music on CD, DVD-A and BluRay. All we ask is that the music and recordings be interesting. We'll ask you to tell us a little about the artist/recording before it is played. Tracks over 6 minutes will be faded out, to give everyone a fair go.
      Whether you are a novice or a seasoned veteran, you will have the opportunity to listen, learn and share your experiences with others of a similar mind.
      Members and Guests welcome – we are a very friendly club so you don't need to know anyone to join us for an afternoon of fine music and sound. We will welcome you at the door.
      Venue: Epping Creative Centre
      Address: 26 Stanley St, Epping
      Doors open 1pm
      Meeting starts at 2pm
      Best regards,
      Tom Waters
      President
      Sydney Audio Club
      www.sydneyaudioclub.org.au
      tomwaters@sydneyaudioclub.org.au
    • By chefscuba70
      For anyone interested in this line up, your welcome to attend.
      The April 2013 meeting of the Sydney Audio Club sees us once again at Dence Park for an afternoon of fine music and sound and convivial company.
      Each month, the Sydney Audio Club presents the finest in high end audio systems for our members and guests. It's a bit like a private audio show once a month where you can hear and discuss equipment that you might not otherwise have the chance to audition. And you can bring along your own music to test the capabilities of the system or to just share with like-minded music lovers in a friendly and relaxed atmosphere.
      This month we will have a system comprising of NAD and Tannoy provided by Audio Products (refer to http://www.audioproducts.com.au/) and Len Wallis Audio (refer to http://www.lenwallisaudio.com/). We will also have Scott Collins (Audio Products Marketing Manager) and Himal Jekishan of Audio Products in attendance.
      For 40 years NAD has been regarded as a market leader in high quality affordable electronics. Today, whilst still producing excellent affordable models, NAD is now recognised around the world as the manufacturer of some of the world's most advanced digital audio products. At the club meeting, we will presenting its acclaimed Masters Series models.
      From the NAD Masters Series, Len Wallis Audio is kindly providing a M2 Direct Digital Amplifier (2 x 250W) which has received many awards and accolades including a ‘Product of the Year’ award from The Absolute Sound. (Refer to http://www.lenwallis...ed-amplifier/m2 and http://www.audioprod...fo.aspx?pid=M-2).
      The M2 integrated amplifier will be driving a pair of Tannoy Definition DC8T’s which are the result of the refinement of over 80 years of audio heritage. The Definition series feature Tannoy’s Dual Concentric™ design which positions the tweeter at the centre of the cone to yield outstanding time coherence and true point source articulation with no energy loss through the crossover region. (Refer to https://audioproduct...px?pid=DEFDC8TB)
      The main front-end will be a NAD C 546BEE CD Player (refer to https://audioproduct...px?pid=C546BEEG). There will also be a NAD M51 Direct Digital DAC on hand (refer to https://audioproduct...o.aspx?pid=M-51).
      The second half of the music sessions will be our popular BYO. Members and guests are welcome to offer music to share with us all. So bring along your favourite music on CD (or CD/SACD hybrid) or flash drives. Sorry, no vinyl this month. All we ask is that the music and recordings be interesting. We'll ask you to tell us a little about the artist/recording before it is played. Tracks over 6 minutes will be faded out, to give everyone a fair go.
      Whether you are a novice or a seasoned veteran, you will have the opportunity to listen, learn and share your experiences with others of a similar mind.
      Members and Guests welcome – we are a very friendly club so you don't need to know anyone to join us for an afternoon of fine music and sound. We will welcome you at the door.
      Venue: Epping Creative Centre
      Address: 26 Stanley St, Epping
      When: Sunday 14th April
      Doors open 1pm
      Meeting starts at 2pm
      Best regards,
      Tom Waters
      President
      Sydney Audio Club
      www.sydneyaudioclub.org.au
    • By TomW
      For our July club meeting … we’re very pleased to have Henry Kristanto of Redefy Audio (http://redefyaudio.com/redefy) present.  Henry last presented to the club in April 2016, when he brought in his superb Redefy Two – this time he’s presenting his impressive Redefy Audio Monitor speakers supported by other top-notch components. 
       
      Before the commencement of our meeting at 2:00, we’ll be having a BBQ to celebrate our 10th year.  The inaugural Sydney Audio Club meeting was held on July 1st 2007 – it’s hard to believe that 10 years have gone by so quickly!  So to celebrate our success and good fortune, we’re having an anniversary/birthday party.  Come by at 1:00 to enjoy good food and great company.  It’s free for members, and only $5 per person for guests.  During our regular meeting, there will also be a raffle and some RockWiz style track guessing - just for fun.  Also in attendance will be Marc Rushton, founder and publisher of StereoNET Australia (http://www.stereo.net.au/), and Edgar Kramer who is Editor-in-Chief of the just launched SoundStage Australia (http://www.soundstageaustralia.com/index.php).  (If you wish to attend our meeting as a guest please see our address at the bottom).
       
       
      The featured system on the day will be as follows: 
       
      Redefy Monitor speakers:  2 way 8” + 1.1” dome tweeter.  Here is what the Redefy Audio website says about the Monitor speaker…
      “Our first 2 way stand mount Monitor with our own proprietary paper cone 220mm Mid woofer providing very low distortion bass and midrange, linear frequency response and impedance, coupled with a low inductance powerful motor to provide excellent sound dynamics, midrange purity and lastly a capable bass to fill up any sized domestic and studio room.   We selected one of the best dome tweeter in the industry, with powerful neodymium motor, excellent treated dome and loaded with short waveguide to provide excellent dispersion to match our Mid woofer.” 
      Refer to http://redefyaudio.com/monitor/ and http://www.audiohifi.com.au/redefy-audio-monitor.php.
      Also refer to a review by Edgar Kramer of the Redefy Two at http://www.6moons.com/audioreviews2/redefy/1.html
       
      Vermouth Little Luccas Mk2 Limited speakers:  2 way with 5” and Raal Ribbon tweeter.  Henry is also bringing in some new speakers by Vermouth.  Until recently, Vermouth was known mostly for its high-end cables.  But Hendry Ramli of Vermouth Audio has now turned his hand to speakers as well. 
      Refer to http://vermouthaudio.com/new/?wpcproduct=little-luccas-mkii-limited-edition
       
      Arte Forma Elyssa Integrated Single End Tube Amplifier with 805, EL34 and 6SN7 tubes:  Refer to http://www.arteformaaudio.com.tw/elyssa.html.
      Rick LeFaver in his review at EnjoyTheMusic said … “Sound wise this amplifier ticks all the boxes, great tonality, world class 3D sound stage, a noise floor on par with all but the very best valve based amplifiers, and macro and micro dynamics in spades. The sound quality of the Elyssa is of reference level for a push-pull tube based amplifier, a perfect entry point for someone looking to explore tube amplifiers.”  Refer to Rick's review at http://www.enjoythemusic.com/magazine/equipment/0813/arte_forma_audio_elyssa.htm
       
      Esoteric SA60 SACD Player:  This is an older player now, but still an excellent component.  Refer to http://www.6moons.com/audioreviews/esoteric9/sa60.html
       
      Vermouth Cabling:  Black Pearl RCA interconnect, Black Pearl Speaker Cable, Red Velvet Power Cable
       
      The second half of the music sessions will be our popular BYO.   Members and guests are welcome to offer music to share with us all.  So bring along your favourite music on CD/SACD (sorry, no vinyl or USB flash drives).  All we ask is that the music and recordings be interesting.  We'll ask you to tell us a little about the artist/recording before it is played.  Tracks over 6 minutes will be faded out, to give everyone a fair go.

      Whether you are a novice or a seasoned veteran, you will have the opportunity to listen, learn and share your experiences with others.  Feel free to come and hear the capabilities of the system, or to just share the experience with like-minded music lovers in a friendly and relaxed atmosphere. 
       
      Guests are welcome – we are a very friendly club so you don't need to know anyone to join us for an afternoon of fine music and sound.

      Venue:  Epping Creative Centre, Dence Park
      Address:  26 Stanley Road, Epping

      When:  Sunday 9th July 2017
       
      Doors open 12:30pm
      Meeting starts at 2pm
       
      Best regards,
      Tom Waters
      President
      Sydney Audio Club
      W: www.sydneyaudioclub.org.au
      FB: https://www.facebook.com/sydneyaudioclub
      E: tomwaters@sydneyaudioclub.org.au
       
×
×
  • Create New...