Jump to content

Sign in to follow this  
mattcalf

FS: Emotiva UPA2 + USP1, AMB Beta22

Recommended Posts

Good evening!

 

Having a bit of an audio set-up simplification. All kit lived in a smoke and pet free home, no cosmetic damage unless noted. All prices exclude postage, buyer is responsible for postage costs!

 

Item: Emotiva USP-1 pre amplifier with remote!

Has a massive range of features, including a very tidy phono pre-amp both MC and MM compatiable. Has served me well, haven't had a hitch since purchasing. Just want to get a modular phono pre-amp.

Location: Melbourne
Price: $300 ONO
Item Condition: Under 4 years old, used but working perfectly.
Reason for selling: Poor uni student downsizing audio set-up.
Payment Method: Pickup - Cash, Paypal
Extra Info: Cost me around $550 to land in Aus. Review here and manual here.

Picture: Here

 

Item: Emotiva UPA-2 power amplifier

Location: Melbourne

Price: $100 ONO
Item Condition: Channel 2 FR is showing a red indicator at the moment, Ch1 is functional. 
Reason for selling: Active speaker setup.
Payment Method: Pickup - Cash, Paypal
Extra Info: Cost me around $600 to land in Aus, shipping is expensive... this thing is heavy! Review here and manual.
Picture: Here, and here, and here, and here (white specs visible in this photo).

 

Item: AMB Beta22 headphone amplifier assembled boards and sigma22 power supply.

Comes with epsilon21 backplane, epsilon12 muting/protection PCB, epsilon27 volume pot mounting PCB, 6x BC546B NPN transistors, 4x BC556B PNP transistors, 2x WIMA 1uF 63v film capacitors and an Alps RK27 stereo pot 50K.
Location: Melbourne
Price: $400 ONO
Item Condition: Assembled and tested by builder, will need heatsinks/power tranny/all casing.
Reason for selling: No headphones left, not skilled enough to finish build.
Payment Method: Pickup - Cash, Paypal.
Extra Info: Killing me to sell this, it's been my dream headphone amp for ages but I just can't commit to the build at this stage. Review here.
Picture: 1 (boards to the left, heatsinks not included).

 

Would be interested in a trade for a good (DIY or otherwise) phono pre amp. Can work out package deal if you want to buy more than one thing.

 

Donation to SNA after completion of sale. 

Regards,

Matt.

 

Feedback at headfi and ebay

Edited by mattcalf
YEAR LATER BUMP

Share this post


Link to post
Share on other sites

Hey Buddy,

 

Whereabouts would pickup be interested in the Emotiva stuff?  looks like paint on the power, might need to see that before agreeing sale.

 

Odd was just looking at the USP earlier today.

 

Cheers

Paul

Share this post


Link to post
Share on other sites

Pick-up in Prahran, happy for you to inspect. PM me if you're interested, regards, Matt.

Edited by mattcalf

Share this post


Link to post
Share on other sites

Fell through with Saviola, everything still available. 

Thanks.

Share this post


Link to post
Share on other sites


Open to offers on this stuff too, thanks. 

Share this post


Link to post
Share on other sites

Behringer DCX2496 still available, make an offer. Everything else has been integrated back into the rig, thanks!

Share this post


Link to post
Share on other sites

As above, hit me with an offer on the DCX. Want it gone.

Share this post


Link to post
Share on other sites


Ill take $200 for the DCX2496

Edited by mattcalf

Share this post


Link to post
Share on other sites

Bump. Just updated listing - make me an offer on the sunny Melbourne Monday!

Share this post


Link to post
Share on other sites

PM sent

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Pieterv
      Item Condition: Excellent 9 - 9.5/10 Shipping Options: Shipping is available at agreed cost. Suburb or Town: Adelaide State: South Australia Payment Method: EFT, Paypal Reason for selling: No longer required Further information: 
      Bought new from miniDSP September 2016. It has been an integral part of my system until recently and provides a serious upgrade for the money. Highly recommended.  
      It has been upgraded to Dirac 2.0 and includes the supplied remote. Also included is a bound set of printed instructions. I now use Roon convolution instead which reduced the box count. 
       
      Please note: The price does not include the calibrated Umik-1 microphone. These are easily available but happy to talk about it.
       
      You will have to change over the licence but that is apparently quite straight forward. miniDSP advise changeover can take a couple of working days.
        
      Photos: Advertisements without photos of the actual item will not be approved.




    • By wolfz
      Price: $300 Item Condition: excellent Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition. Suburb or Town: Redland Bay State: Queensland Payment Method: PayPal Cash Reason for selling: Got an amp/dac all in one
      Extra Info:
       A few tiny marks (edge), not easy to see, no original box. Normal retail price new is $800.
      A very good sounding amp with two crossfeed stages and two gain settings.
       
      Tech Data copied from Meyer:
      Sure, from the outside the CLASSIC looks very modest and plain. However, technically and sonically this is the best and most advanced amplifier that we've ever build.

      Of course this amplifier also uses the concept of active balanced headphone ground. Within this concept each headphone connection wire carries an additional signal such that the sum of the potentials of the wires equals zero. This strongly minimizes the energies stored and released in the electrical fields inside the headphone cable when an audio-signal is applied. The influence of the wire on the sound is thus reduced.

      Moreover, with active ground pollution of the internal signal ground by strong driving currents is eliminated and the power-supply-rejection-ratio at the output stages is strongly improved. Thus the best conditions are given for a clean and undistorted sound.

      Active balanced headphone ground offers most of the advantages of a true balanced headphone setup without the need of balanced connections. It can be used with any conventional dynamic or magneplanar headphone.

      The volume control is technically very sophisticated. The position of the potentiometer is measured with the use of an AD-converter. The output of this converter is then used to switch a bank of relais to set the proper volume level. There are a total of 64 levels which allows for very small stepsizes and a very analog feeling. The advantages of this concept are strongly reduced channel-imbalances and a much cleaner and more detailed sound. The use of a conventional stereo-potentiometer does add its own sonic signature which is now prevented.

      The amplification section is build around AD797 opamps biased into class-A. For the output stages BUF634 buffer amplifiers are used. These integrated circuits are very fast and thus allows the output signals to follow the input signals very closely. The amp is DC-coupled and any capacitors found in the signal path are of the highest quality polypropylen and polystyrol.

      A very extensive powersupply, a large number of power-regulators, and a total filter capacity of 80.000 microF (!!) assure the best working conditions for any part of the circuitry.

      The built-in crossfeed filter is a frequency-extended version of the natural crossfeed found in previous CORDA amplifiers and provides even better imaging. It also offers three intensity levels (Stereo, medium, high). To compensate for the psycho-acoustic bass-loss a separate switch allows to slightly increase lower-frequencies.

      Technically the CLASSIC is an extremely advanced headphone amplifier and offers excellent value-for-money!


    • By tchye nguyen
      Item: SHUNYATA DIAMOND BACK 1.8M POWER CABLE TERMINATE IN FURUTECH AUSTRALIAN PLUG AND 20a C19 IEC REFER TO PHOTO.
      Location: MELBOURNE
      Price: $$450
      Item Condition: VERY GOOD LIKE NEW
      Reason for selling: NO LONGER REQUIRE
      Payment Method: Pickup - Cash, COD Only, BANK TRANSFER. POST AT BUYER COST
      Extra Info: I BOUGHT THIS CABLE SAME TIME I BOUGHT SHUNYATA HYDRA CYCLOPS FOR SALE ON STEREONET RIGHT NOW. THIS CABLE IS DESIGN TO GET BEST CURRENT FOR YOUR POWER AMPLI. PLEASE PM ME IF YOU NEED MORE INFO OR SEARCH THE WEB.
       
      WILL DONATE AFTER SALE
       
      Photos: Advertisements without photos of the actual item will not be approved.





    • By tchye nguyen
      Item: SONY LASER ASSEMBLY KSS 331A Genuine. 
      Location: Melbourne
      Price: $280
      Item Condition: New never been use
      Reason for selling: Kenwood CD player LD1 had been sold no longer require. 
      Payment Method: Pickup - Cash, COD Only, bank transfer
      Extra Info: Bought new from Germany as a spare for Kenwood CD player LD1. Never been use. It is a genuine Sony KSS 331A ( not a Chinese cheap copy ) which might be able to use with other CD player please search the Web before buy.
       
      will donate after sale.
       
      Photos: Advertisements without photos of the actual item will not be approved.


    • By tchye nguyen
      Item: CEC CD TRANSPORT MODEL TL51X
      Location: MELBOURNE
      Price: $650
      Item Condition: VERY GOOD. COME WITH ORIGINAL BOX ORIGINAL REMOTE AND CLAMP. 
      Reason for selling: TOO MANY CD PLAYER
      Payment Method: Pickup - Cash, COD POST AT BUYER COST
      Extra Info: THIS MACHINE HAD BEEN SERVICE AND BELT REPLACE BY CLARK AUDIO IN MELBOURNE. THIS BELT DRIVE IS A VERY VALUE FOR MONEY SOUND WARM AS IT IS A BELT DRIVE UNIT.
      WILL DONATE AFTER SALE.
      NOTE THIS IS A CD TRANSPORT REQUIRE A DAC
       
       
      Photos: Advertisements without photos of the actual item will not be approved.





×
×
  • Create New...