Search the Community

Item: Metaxas IKARUS stereo integrated amp with phono input by Graham Thirkell. Manual and reviews attached. Location: Melbourne Price: $1350 negotiable Item Condition: Well cared for, and checked by Open Ear Audio in April ‘19. Reason for selling: Looking for a new home where it can be used and appreciated. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: This fine amplifier was chosen for his personal use as his reference amplifier by renowned professional audio designer and acoustician Graham Thirkell. Graham’s many tape recorder designs are unmatched, and his large range of studio equipment still highly sought. Read Graham’s profile at this Audio Engineering Society link: http://www.aesmelbourne.org.au/graham-thirkell/ Graham and Kostas Metaxas had many conversations on the differences and similarities between high end and professional design and requirements, and they collaborated on occasion. The phono input on this amp is one result of that collaboration. It is difficult for me to say goodbye to this amp. Not only because it has such a beautiful sound, but also as it holds so many memories of listening together with Graham to new music and equipment. This is a once only opportunity to purchase and enjoy a piece of proud history of the design initiatives of Australian high quality audio designers. Photos: without photos of the actual item will not be approved. ___IKARUS_MANUAL_FINAL.pdf

Item: Rotel RC870BX Location: Albury 2640 Price: $170 Item Condition: Very good Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, Extra Info: My Rotel RC870bx Preamp is not in use anymore and having a nice phono stage i think someone may be interested in adding it to their system. It is in very good condition and works well. The print around the volume/balance dial has been removed by myself as it was getting a bit shabby. I am happy to post and also willing to work a deal. Photos: Advertisements without photos of the actual item will not be approved.

Item: Dynavector P75 Mk II phono Location: Melbourne Price: $380 Item Condition: Excellent Reason for selling: Not being used / have not bought a Dynavector cartridge as planned. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Purchased from a very knowledgeable forum member. I bought it with plans to also buy a Dynavector DV20x2, but this has not happened. Photos:

I just bought myself a new receiver, a Marantz SR7500, for my vinyl setup. It doesn't have a phono stage like my Dad's old NAD I've been using until now, so I'm after an external one. My turntable is a Technics SL-BD20 though that will likely be upgraded in the coming months. FWIW I'm just listening with headphones for now, Sennheiser HD58X, speakers will come later down the line. Preferably I'd like something under 200 downundeh dollars, and preferably not an import. Ones I've found include; Schiit Mani $269 free shipping Pro-ject Phono Box $180 + shipping Rega Phono Mini A2D $149 free shipping Pro-Ject Phono Box SE ii $200 used + shipping The Schiit is a bit pricier than I'd really like but I've heard a lot of good things about it and it has by far the most information / impressions out there. Which do you think would be the best choice, is there something else I should consider? Any insight would be greatly appreciated, thanks!

Item: Ray Samuels F-117 Nighthawk MC/MM Phono Location: Canberra Price: $500 Item Condition: Very good, no scratches, works perfectly, with original charger and box Reason for selling: Upgraded Payment Method: Pickup - Cash, Paypal,, Bank Transfer Extra Info: Pictures:

Hi gang. I'm continuing on my steep learning curve procrastination.....I mean.....research. I am setting up new gear, and plan to integrate my old Pro-ject 6.1 tt into the new system. I currently use a modest little Creek phono stage. My new setup can potentially be totally balanced front to back. No, this is not a debate about single ended vs balanced post! Rather, I am interested in advice on how to get the best out of the turntable connections (and no, it's not a post about placement, vibration isolation either!). I have a pre with balanced XLR in and out. I have true balanced XLR in Monoblock valve power amps. One set of balanced inputs to pre will be taken by a dac, leaving one spare. So (whew) this is the question. If one runs RCA leads from tt (as it is currently), are these technically carrying a balanced signal? If so, then I assume if up I use/build a phono stage that can keep a balanced signal to pre, then we still have a true balanced signal? Or, does the tt need rewiring for XLR outs? Or, does it not make a difference? Or......? Ideas?

Item: Jadis DPMC Phono Preamplifier Location: SYDNEY WEST (NSW 2190) Price: $2200 (priced cheap for a quick sale) Item Condition: Excellent Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Up for sale is my Jadis DPMC Phono stage, very good for both eyes and ears, factory 240v for AU market. I don't have the original box but can be well pack for post. Local pick up and audition can be arrange and preferred. Happy to answer what I know via PM only please. Hope she can be enjoy by another LP lover. SPECS & PRICING Gain: 0~66dB Input impedance: 47k ohm Output impedance: <1k ohm Power consumption: 30W Dimensions: 17.9** x 4.9** x 12.6** Weight: 11 kg Price: US$6900 (New) More details can be found on the review from the following link: http://www.theabsolutesound.com/articles/jadis-dpmc-phono-preamplifier/ Pictures:

Item: Audio Research SP17 preamp (Silver) with phono Location: Adelaide Postage: Free shipping to eastern states Price: $2000 shipped to eastern states! Item Condition: 9/10 because it is used Reason for selling: Downsizing Payment Method: COD, bank transfer or Paypal with any paypal fees Extra Info: For sale on behalf of my friend who has is downsizing to integrated system due to his age. The unit is roughly 1.5 yrs old and bought new from authorised dealer. ~100hrs use as mention by the owner. I do reckon that it might be less than that because he has been travelling a lot since after his retirement 2 years ago. I think the tubes are not even break in yet. The unit is present as new. There is no visible scratches or dings while i took the photos. All manual and remote are included. I can organise the shipping as it comes with all the original packaging for interstate buyer. Please note that this unit has the PHONO input! I can remove the two 6H30 vacuum tubes and pack them in the original box if required. His speakers will also be available for sale when i have more time to help him for the photo shoot. Pictures:

Item: Sheer Audio MM-88 Marantz 7 based phono stage Location: North Brisbane - Local sale (in person) only Price: $300 Item Condition: As new Reason for selling: No longer required - I've moved to solid state phono stages Payment Method: Pickup - Cash Extra Info: I've sourced a number of difference brand NOS tubes for this stage. All are included. All in all an extremely wide and relaxed sound stage. Very pleasant sounding. The MM-88 uses 6av6 single triode tube to replace 12ax7 dual triode which bring greater clarity, detail, transparency and have better channel separation. And MM-88 uses full valve based voltage regulation for high tension power supply. Dimensions: 26 x 26 x 19 cm Specification: power consumption: less than 25W main voltage: 220V AC@50/60Hz inputs: 1 stereo single-ended(RCA) outputs: 1 stereo single-ended(RCA) gain: 200x S/N: 88dB frequency Response: 10Hz~50kHz +- 1db weight: 7kgs tube usage: 6x 6av6, one 6x4, one 6ak5, one 6ak5, one 0a2 Pictures:

Item: PS Audio NuWave Phono Location: Sydney Hi-Fi Castle Hill Shop 7/19 Victoria Avenue Castle Hill, NSW Price: $895 Item Condition: Excellent Reason for selling: Trade In Payment Method: Pickup - Cash, Paypal, Card Extra Info: PS Audio NuWave Phono Features: Full-featured Analog to Digital Converter High resolution balanced or single ended analog outputs for phono High-resolution asynchronous DSD and PCM outputs from A/D 1 stereo analog input from any source such as a tuner 1 stereo phono input Accepts low output moving coil cartridges (0.5mv) Moving magnet cartridges Passive RIAA curve Resistive cartridge load selector Mono or stereo select 100% pure analog path for the phono stage Gain select from the front panel Asynchronous digital output to 192kHz 24 bit Asynchronous DSD output at 64X and 128X Polarity invert function XLR, RCA analog outputs S/PDIF, I2S, USB digital outputs 80kHz bandwidth on A/D Converter A/D sample rate 352.8kHz DoP protocols for DSD Massive power supply Front panel OLED display RIP to either Mac or PC in DSD or PCM Build a library of your vinyl, tape or from radio broadcasts Record live events or even studio work without compromise Play live into any DAC with DSD or PCM Pictures:

Item: ME 25 Preamp with MC phono, Location: Albion Park NSW Price: $800 delivered Item Condition: As per pics. Some cosmetic blemishes on top Reason for selling: Dog needs surgery so i need to raise funds. Really need it sold Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: High performance pre offering fantastic value with factory installed MC Phono. Unmodified example that has not been corrupted by unqualified personnel. A good condition pre with a wide variety of inputs and proven history. No Remote Pictures:

Item: Pro-ject 1Expression III Carbon Mahogany finish with OM2 Red and Pro-ject speed box upgrade Location: Perth 6010 Price: $650 Item Condition: Really nice condition - no significant marks or scratches - no box Reason for selling: Too much stuff Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Pick up only - I do have a DIY Phono stage I could include if the buyer needed one - its a very nice phono stage as well. This is a really nice condition deck with the speed upgrade meaning push-button speed change and more accuracy. Pictures:

Item: Audio Research SP17 preamp (Silver) with phono Location: Adelaide Postage: Free shipping to eastern states Price: $2300 --> $2200 --> $1950 shipped to eastern states! Item Condition: 9/10 because it is used Reason for selling: Downsizing Payment Method: COD, bank transfer or Paypal with any paypal fees Extra Info: For sale on behalf of my friend who has is downsizing to integrated system due to his age. The unit is roughly 1.5 yrs old and bought new from authorised dealer. ~100hrs use as mention by the owner. I do reckon that it might be less than that because he has been travelling a lot since after his retirement 2 years ago. I think the tubes are not even break in yet. The unit is present as new. There is no visible scratches or dings while i took the photos. All manual and remote are included. I can organise the shipping as it comes with all the original packaging for interstate buyer. Please note that this unit has the PHONO input! I can remove the two 6H30 vacuum tubes and pack them in the original box if required. His speakers will also be available for sale when i have more time to help him for the photo shoot. Pictures:

Item: Clearaudio Smart Phono stage, and Schiit JIL Analogue to Digital Converter Location: South Brisbane Price: $250 each inclusive of postage by Express Post Satchel. Item Condition: excellent Reason for selling: upgrade Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: I bought the phono stage from member a few years ago and it has been great. So small, wonderful output. Can be used with both MM and MC cartridges. Have original packaging and operating instructions. I understand unit was originally purchased in Germany, and comes with adapter for Australian sockets. The Schiit JIL analogue to digital converter was purchased from Addicted to Audio in November 2018, and is as new. I purchased it to put my foot in the water with digitising vinyl, and it worked great. New price is $399. Purchase both and I will throw in a pair of Schiit PYST 6 inch RCA cables. Please PM me with any queries or interest. Pictures:

Item: Yamaha RX-V2095 Location: Abbotsford, Melbourne Price: $300 Item Condition: 8/10 (No discernable marks) Reason for selling: Selling on behalf of my bro, who's moving to the US Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Find a review here Some words from my bro (although I think mostly from the Yamaha website ): "The RX-V2095 is a 7 channel receiver providing the finest performance and processing available for music and video sound. Discrete power transistors rather than IC chips are used in the amplifier section to provide the cleanest sound possible. The amp delivers 100 watts each to the five channels i.e. Main, Centre and Rear at a very low 0.02% THD and 25 watts each to the front effects. This amp is a true audiophile quality product in perfect operating condition. I paid $2,100 for this unit and it comes packaged in a rare Gold and wood styling. Included are remotes (Main and Zone 2), AM Loop Antenna and the original User Manual." Feel free to shoot through any questions and I'll answer as soon as I can . Key Features Channels - 7.1 Output Power - 550 Watt Amplifier Output Details 140 Watt - 8 Ohm - 20 - 20000 Hz 170 Watt - 6 Ohm - 20 - 20000 Hz 220Watt - 4 Ohm - 20 - 20000 Hz 320 Watt - 2 Ohm - 20 - 20000 Hz Sound Output Type Surround Sound HDMI No Built-in Decoders DTS, Dolby Digital, Dolby Pro Logic Receiver Tuner Type Digital Receiver Tuner Bands AM/FM Response Bandwidth 10 - 50000 Hz Technical Features Input Impedance - 47 kOhm Input Sensitivity - 150 mV Power Consumption Operational - 770 Watt Connectivity 1 X AM Tuner Antenna input - rear, 1 X Analog Audio output - rear, 1 X Composite (Video) output - rear, 1 X Digital Optical output - rear, 1 X FM Tuner Antenna input - rear, 1 X Headphones output - front, 1 X Multichannel Analog Audio input - rear, 1 X Multichannel Analog Audio output - rear, 1 X RCA (2 Audio Channels) input - front, 1 X S-Video input - front, 2 X Digital Coaxial input - rear, 2 X S-Video output - rear, 3 X Analog Audio input - rear, 3 X RCA (2 Audio Channels) output - rear, 4 X Digital Optical input - rear, 4 X RCA (2 Audio Channels) input - rear, 5 X S-Video input - rear Dimensions Height - 6.77 in. (171mm) Width - 17.13 in. (435mm) Depth - 18.5 in. (470mm Weight - 47.4 lb (21.5kg) Pictures:

Item: World Audio Design KLPP1 TUBE/VALVE PHONO PRE AMPLIFIER Location: Goulburn 2580 NSW Price: 250 Item Condition: Excellent fully working Reason for selling: Too many pre amps. Payment Method: Pickup - Cash, bank transfer Extra Info: An extremely well built valve powered pre amp costing around £700 when new with the ability to roll the two valves. Warm rich open valve sound making vinyl come to life. Five line inputs and tape monitor These are rare in good working order. Happy To Post at Buyers Expense Note: Totally unmodified in any way and working to original spec. Actual Photos Below. Pictures:

Item: Dynavector P75 Mk II phono Location: Melbourne Price: $380 Item Condition: Excellent Reason for selling: Not being used / have not bought a Dynavector cartridge as planned. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Purchased from a very knowledgeable forum member. I bought it with plans to also buy a Dynavector DV20x2, but this has not happened. Pictures:

Item: Pro-Ject Audio Tube Box S Phono Preamplifier Location: Canberra, ACT, 2614 Price: $350 + postage if required Item Condition: Like new Reason for selling: Simplifying my setup/cash for other items Payment Method: Pickup - Cash, Paypal, Bank Transfer Extra Info: Purchased from Audio Trends in August 2016 for $490. Original receipt included. Used it for my turntable / tube amp setup, its had maybe 20 hours listening time. Comes with the supplied power supply + instruction manual. Pictures:

Item: Pro-Ject Phono Box RS Location: ACT Price: $800 ONO (+ postage) Item Condition: Excellent condition Reason for selling: Not using Payment Method: Pickup - Cash, Paypal (+2.4%), Direct Credit Extra Info: http://v2.stereotimes.com/post/project-audio-systems-phono-box-rs https://www.analogueseduction.net/project-phono-stages/pro-ject-phono-box-rs.html https://www.analogplanet.com/content/pro-ject’s-mmmc-phono-box-rs-chronic-overachiever

Item: Sonneteer Sedley phono with USB vinyl ripping facility (ADC) Location: Randwick NSW Price: $600 plus shipping Item Condition: very good, and with little use Reason for selling: Surplus to needs Payment Method: Pickup - Cash, Bank tfr Extra Info: having had many phonos over the years this is an incredible one for the asking price. With ADC functionality you can digitise your record collection by just adding software. Flexible leadings and MM/MC suitable. Comes with original packaging and manuals. It’s a solid piece of engineering topping scales at 4kg. http://wallofsound.ca/audioreviews/sonneteers-sedley-sings/ Pictures:

Item: Lounge Audio LCR MKIII Location: Wollongong Price: $300 + Shipping (if needed) Item Condition: As New Reason for selling: Upgraded to a tube MC pre-amp Payment Method: Pickup - Cash, Paypal Extra Info: Fantastic pre-amp that punches way above its price point. Out of the box support for MM and with the Copola set up transformer from Lounge can handle MC as well. See the website for more info:http://www.loungeaudio.com/lcr-mr-iii Comes with australian plug and wall-wart (supplied by Lounge). Pictures:

Item: Barely used Ortofon Quintet Blue MC Cart Location: Wollongong Price: $425 includes free shipping with tracking anywhere in Oz Item Condition: Excellent, purchased late April 2018. Has about 50 hours on it. Reason for selling: Bought several carts and like another one better Payment Method: Pickup - Cash, Paypal Extra Info: Complete with box, and all original accessories. Great cart but prefer the Hana SL instead so this one has to go. Barely used, probably 2-3 hours of listening per week for the last five months, so just run in for the new owner. Price is for cash or Paypal friends and family payment. Happy to take paypal with goods and services but buyer pays the surcharge. Pictures:

Item: Herron VTPH-2 phono stage in black Location: Sydney West 2190 Price: $3000 Item Condition: Very good, refer to photos Reason for selling: NLR Payment Method: Pickup - Cash, Paypal (+3%), COD Only Extra Info: Up for sale is my Herron VTPH-2 phono stage, it served me well for the past 5 years, time to try something else, It's installed with 1 x Telefunken ECC801S 2 x EI 12AX7 2 x CVC 12AX7 So it's in high gain mode. you can replace 2 x 12AX7 with 12AT7 for low gain mode. Local pick up welcome, happy to post even I don't have the original box, I can pack it well for a safe journey. Many excellent reviews and happy users out there, please send PM if you have any question, happy to answer what I know. Spec: Specifications Tube complement (2 x 12AX7, 3 x 12AT7) - most popular, or (4 x 12AX7, 1 x 12AT7) Gain MC Mode (2 X 12AX7, 3 X 12AT7) 64 dB (4 X 12AX7, 1 X 12AT7) 69 dB Gain MM Mode (2 X 12AX7, 3 X 12AT7) 43 dB (4 X 12AX7, 1 X 12AT7) 48 dB Frequency response RIAA 20 Hz to 20 kHz ±0.1 dB at 10k Ohm output load impedance and higher Distortion Less than 0.03% at 2.45 volts output at 1kHz at 20k Ohm and higher output load impedance (tube selection dependent) Note: Lowest distortion and best performance occurs with output loading at or above 20k Ohms - this gives the most dynamic sound Signal-to-Noise Ratio 88 dB, A weighted Output impedance (2 X 12AX7, 3 X 12AT7) 400 ohms (4 X 12AX7, 1 X 12AT7) 500 ohms Input impedance Infinite with no load resistors connected Note: load resistors can be connected externally via RCA connectors or soldered internally Absolute polarity Non-inverting (all modes) Power Requirements Standard IEC connector - most international voltages available Overall dimensions 17.6" wide x 4" high (including rubber feet) x 10.25" deep Warranty 3 years, parts and labor; tubes: 90 days U.S. Retail Price $3,650 U.S.D. Pictures:

Item: Project Phono S preamplifier Location: Bunyip VIC, Southeast Melbourne Price: $99 + Shipping. (Will deliver free anywhere in Melbourne if desired, if you buy one of my other items I currently have for sale here.) Item Condition: Used, excellent, see photos Reason for selling: No longer required. Payment Method: Cash; Paypal (add 3%); Bank Transfer Extra Info: I have had this unit for about four years and it has performed with excellence the whole time. It is in excellent condition, as can be seen from the photos. Comes with power supply. I went deaf in one ear from a virus a few months ago, and have neither a need nor desire for my hi fi gear any longer. After months of deliberation, I've decided to sell it all, so please have a look at my other listings in case there is anything else you might like. You are welcome to come and pick it up from Bunyip, about 20 minutes east of Pakenham. Or I am also happy to deliver it anywhere in Melbourne for free if you prefer, if you buy one of my other items I currently have for sale here. Alternatively, shipping can be arranged at the buyer's expense. https://www.whathifi.com/pro-ject/phono-box-s/review Pictures:

Item: Linto Phono Pre-Amp Location: Doreen, Vic Price: $950 Condition: Mint Reason for selling: No longer required Payment Method: Pickup - Cash Extra Info: Pictures: