Search the Community

Item: Parasound JC-2 Preamp (black) Location: Adelaide Price: $3900, $3750 negotiable (ORP $9k) Item Condition: Excellent - 1 scuff mark (see close up photo) Reason for selling: change in direction Payment Method: Pickup - Cash, Paypal, Extra Info: This rare black JC-2 (not BP) was purchased ex-demo in April, with 2 years factory warranty - ie 18 months of warranty remain Aside from the small mark on the upper facia above the volume control, it is flawless. The remote, on the other hand is a different story. While perfectly functional, It suffered from the usual breakdown of the rubberised coating, which has been stripped away (along with a couple of chips of paint). New replacement remotes are purchasable, or it will function just fine with a universal remote. Designed by John Curl, and part of the "Halo" series, it is a cut above Parasound's more recent preamps. Its successor, the JC-2 BP (just HT bypass added) remains on Stereophile's recommended preamp list this year. https://www.stereophile.com/solidpreamps/308para/index.html https://www.stereophile.com/content/recommended-components-2019-edition-preamplifiers It was shipped to me with good, but ad hoc packaging, arriving unharmed, but a local sale is preferred. Photos:

Item: Parasound JC1 - Power Amp Monoblock (x2) 400 watts @ 8 Ohm Location: Sydney Price: 6,500 6200 Item Condition: Used Reason for selling: NLR. Settling in with tubes amp Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: PICKUP ONLY - NO SHIPPING. Third owner. Age is around 6 years old. Still current model at their product range because it is just THAT good. I would like to sell these rather than being unused because I'm quite content with my tubes amp. Still have boxes available. Even though these are 400w / 8ohms each, Stereophile did a measurement test and the true numbers are somewhere around 568w/8ohms each! Very powerful solid state amps that can drive any speakers on planet earth (even Bose!). I used these to power my Dynaudio Confidence C2 and they power them without any sweat, even though Dynaudio C2 are famous for being difficult to drive. Happy to provide demo for serious buyers. The amp was designed by the famous John Curl, read up the story about this amp and you will be convinced that this is a serious piece of engineering and they did not skim with the components inside either. There are minor scuff marks on the chassis which is quite normal for amps at this age. The JC1 runs in pure Class-A up to 25 watts at eight ohms, with its bias set to high and ten watts into eight ohms with the bias set to low. The sticker that you see on the back panel is from the first owner from repairing a power button and an LED, so it's a very minor repair. These amps are still being sold on hi-fi stores in Sydney for $9,000 EACH. So grab a massive bargain, it's a no brainer to get it at this price when you could have spent $18,000 for the pair. FEATURES: Premier monaural amplifier Circuitry designed by legendary John Curl and CTC Builder Ultra-high bias Class A/AB operation Exclusive two position bias level adjustment Balanced inputs with discrete circuits and XLR connectors Vampire Direct gold-plated OFC RCA input Dual heavy-duty 24k gold-plated 5-way speaker binding posts Direct Coupled - no capacitors or inductors in signal path Complementary MOSFET driver stage and JFET input stage 18 beta-matched 15 amp, 60 MHz bipolar output transistors 1.9 kVA encapsulated toroid power transformer Independent power supplies for input, driver and output stages 18,000 μF filters for driver stage 132,000 µF Nichicon Gold Tune filters for output stage DC Servo and relay protection circuits REL and Nichicon Muse capacitors Harris hyper-fast soft recovery diodes for all bridge rectifiers Auto turn-on by 12v trigger or audio signal trigger Ground lift switch , adjustable turn-on delay 4u Chassis with rear carry handles, rack mounting kit included Premium detachable AWG 12 power cord with silver solder THX Ultra2 certified SPECS: Continuous power output, 20Hz - 20 kHz: 400 watts RMS x 1, 8 Ω 800 watts RMS x 1, 4 Ω 1200 watts RMS x 1, 2 Ω Class A power output, 20Hz - 20 kHz: 25 watts, bias set to high, 8 Ω 10 watts, bias set to low, 8 Ω Current capacity: 135 amperes peak Power bandwidth: 2 Hz - 120 kHz, +0/-3 dB at 1 watt Total harmonic distortion: < 0.15 % at full power IM distortion: balanced 16 V rms < 0.03 % Slew rate: > 130 V/µsecond Dynamic headroom: > 1.8 dB Input sensitivity: 1 V for 28.28 V, THX Reference Level Input impedance: 100 k Ω S/N ratio: >120 dB, IHF A-weighted, bias set to high >122 dB, IHF A-weighted, bias set to low Damping factor: > 1200 at 20 Hz Power Requirement : 250 watts idle 1280 watts full power into 4 Ω DC trigger output capacity : +12 Vdc, 150 mA Dimensions: 17-1/2" w x 7-5/8" h x 20" d, 7" h without feet Net weight: 64 lb. Reviews: Stereophile: https://www.stereophile.com/solidpoweramps/774/index.html Home Theater Review: https://hometheaterreview.com/parasound-halo-jc-1-monaural-amplifier-reviewed/ Enjoy the Music: http://www.enjoythemusic.com/superioraudio/equipment/1103/parasoundjc1.htm Pictures:

Item: Parasound JC1 - Power Amp Monoblock (x2) 400 watts @ 8 Ohm Location: Sydney Price: 6,500 6200 Item Condition: Used Reason for selling: NLR. Settling in with tubes amp Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: PICKUP ONLY - NO SHIPPING. Third owner. Age is around 6 years old. Still current model at their product range because it is just THAT good. I would like to sell these rather than being unused because I'm quite content with my tubes amp. Still have boxes available. Even though these are 400w / 8ohms each, Stereophile did a measurement test and the true numbers are somewhere around568w/8ohms each! Very powerful solid state amps that can drive any speakers on planet earth (even Bose!). I used these to power my Dynaudio C2 and they power them without any sweat, even though Dynaudio C2 are famous for being difficult to drive. Happy to provide demo for serious buyers. The amp was designed by the famous John Curl, read up the story about this amp and you will be convinced that this is a serious piece of engineering and they did not skim with the components inside either. There are minor scuff marks on the chassis which is quite normal for amps at this age. The JC1 runs in pure Class-A up to 25 watts at eight ohms, with its bias set to high and ten watts into eight ohms with the bias set to low. The sticker that you see on the back panel is from the first owner from repairing a power button and an LED, so it's a very minor repair. These amps are still being sold on hi-fi stores in Sydney for $9,000 EACH. So grab a massive bargain, it's a no brainer to get it at this price when you could have spent $18,000 for the pair. FEATURES: Premier monaural amplifier Circuitry designed by legendary John Curl and CTC Builder Ultra-high bias Class A/AB operation Exclusive two position bias level adjustment Balanced inputs with discrete circuits and XLR connectors Vampire Direct gold-plated OFC RCA input Dual heavy-duty 24k gold-plated 5-way speaker binding posts Direct Coupled - no capacitors or inductors in signal path Complementary MOSFET driver stage and JFET input stage 18 beta-matched 15 amp, 60 MHz bipolar output transistors 1.9 kVA encapsulated toroid power transformer Independent power supplies for input, driver and output stages 18,000 μF filters for driver stage 132,000 µF Nichicon Gold Tune filters for output stage DC Servo and relay protection circuits REL and Nichicon Muse capacitors Harris hyper-fast soft recovery diodes for all bridge rectifiers Auto turn-on by 12v trigger or audio signal trigger Ground lift switch , adjustable turn-on delay 4u Chassis with rear carry handles, rack mounting kit included Premium detachable AWG 12 power cord with silver solder THX Ultra2 certified SPECS: Continuous power output, 20Hz - 20 kHz: 400 watts RMS x 1, 8 Ω 800 watts RMS x 1, 4 Ω 1200 watts RMS x 1, 2 Ω Class A power output, 20Hz - 20 kHz: 25 watts, bias set to high, 8 Ω 10 watts, bias set to low, 8 Ω Current capacity: 135 amperes peak Power bandwidth: 2 Hz - 120 kHz, +0/-3 dB at 1 watt Total harmonic distortion: < 0.15 % at full power IM distortion: balanced 16 V rms < 0.03 % Slew rate: > 130 V/µsecond Dynamic headroom: > 1.8 dB Input sensitivity: 1 V for 28.28 V, THX Reference Level Input impedance: 100 k Ω S/N ratio: >120 dB, IHF A-weighted, bias set to high >122 dB, IHF A-weighted, bias set to low Damping factor: > 1200 at 20 Hz Power Requirement : 250 watts idle 1280 watts full power into 4 Ω DC trigger output capacity : +12 Vdc, 150 mA Dimensions: 17-1/2" w x 7-5/8" h x 20" d, 7" h without feet Net weight: 64 lb. Reviews: Stereophile: https://www.stereophile.com/solidpoweramps/774/index.html Home Theater Review: https://hometheaterreview.com/parasound-halo-jc-1-monaural-amplifier-reviewed/ Enjoy the Music: http://www.enjoythemusic.com/superioraudio/equipment/1103/parasoundjc1.htm Pictures:

Item: Parasound ZoneMaster 1250 Location: LWA HQ, 64 Burns Bay Road, Lane NSW Price: $1500 Item Condition: Excellent 2nd Condition Payment Method: Credit Card, Cash, Paypal, Bank Transfer, ZipPay Shipping: To any port on the high seas, POA Extra Info: This the current model retails for $3,995. In excellent secondhand, we've got it for just $1,500 but what is it exactly? It's a Class AB plus premium Class D power stage twelve channel (12) universal amplifier for applications from 50 to 200 watts 24 speaker connections (A and B outputs for all 4 channels). High current for stable operation at 2 Ohms Channel pairs are bridgeable for up to 200 watts @ 4 Ohms Independent audio sensing triggers, one for each zone 6 Independent 12 volt trigger inputs, one for each zone. Read more about it here Pictures:

Item: Parasound JC 2 BP Location: Sydney Hi-Fi Castle Hill Shop 7/19 Victoria Avenue Castle Hill, NSW Price: $3,500 Item Condition: Used very good condition Reason for selling: trade in Payment Method: Pickup - Cash, Paypal, Cards Extra Info: Home theatre bypass enables seamless blending into a digital surround system Home theatre bypass functions with both unbalanced & balanced inputs and outputs Home theatre bypass function can be assigned to any input Bypass remains selected after the unit has been turned off Improved remote control is included with the bypass assignment keys Specifications and sonic performance are 100% the same as the original JC 2 6 pairs unbalanced RCA line-level audio input jacks 2 input pairs can be switched to XLR balanced connectors Independent balanced/unbalanced select for the L & R channel Each channel’s input is switched by its own gold-on-silver contact relay 4 output jack pairs with specialized functions: 1 Main output jack pair is balanced XLR, polarity is switched by remote 1 Main output jack pair is unbalanced RCA, polarity is switched by remote 1 output jack pair is unbalanced RCA, inverted polarity only 1 output pair is unbalanced RCA, normal polarity, fixed level for recorders Dual-mono left & right channel circuit boards minimize crosstalk Hand-matched complementary FETs Direct DC servo-coupled, no capacitors in the signal path Premium 4-gang motor-driven analog master volume control Separate TKD brand analog gain controls for L & R channel 3/8″ thick aluminium shielding around audio boards Shielding prevents noise from power supplies & control circuits Separate output jacks for simultaneous normal & non-inverting polarity Aluminium chassis rear panel Remote control polarity switching uses gold-on-silver contact relays Vampire brand 24k gold-plated RCA jacks Neutrik brand premium XLR connectors Canare brand internal wiring High capacity R-core audio power transformer & inductor Hyper-fast soft recovery audio bridge rectifiers diodes Independent power supply for controller, relay coils, triggers, LEDs Remote control handset controls all functions Discrete IR codes for remote control Four 12v trigger output jacks for power amp auto turn-on: Two 12v trigger jacks are switched by the remote handset Two 12v trigger jacks are live when the JC 2 is turned on Two-way RS-232 serial port connection Line level inputs only; no inputs for phono Audio mute is switched by independent L & R relays Rear panel IR repeater input & loop out jacks Pictures:

Item: Parasound JC1(pair) Location: Sydney Hi-Fi Castle Hill Shop 7/19 Victoria Avenue Castle Hill, NSW Price: $8,000 Item Condition: used in very good condition Reason for selling: Trade In Payment Method: Pickup - Cash, Paypal, Cards Extra Info: Recently traded Mono's in excellent condition and a steal at this price! Parasound JC 1 Key Features; Premier monaural amplifier Circuitry designed by legendary John Curl and CTC Builder Ultra-high bias Class A/AB operation Exclusive two position bias level adjustment Balanced inputs with discrete circuits and XLR connectors Vampire Direct gold-plated OFC RCA input Dual heavy-duty 24k gold-plated 5-way speaker binding posts Direct Coupled – no capacitors or inductors in signal path Complementary MOSFET driver stage and JFET input stage 18 beta-matched 15 amp, 60 MHz bipolar output transistors 1.9 kVA encapsulated toroid power transformer Independent power supplies for input, driver and output stages 18,000 μF filters for driver stage 132,000 µF Nichicon Gold Tune filters for output stage DC Servo and relay protection circuits REL and Nichicon Muse capacitors Harris hyper-fast soft recovery diodes for all bridge rectifiers Auto turn-on by 12v trigger or audio signal trigger Ground lift switch , adjustable turn-on delay 4u Chassis with rear carry handles, rack mounting kit included THX Ultra2 certified Continuous power output, 20Hz – 20 kHz: 400 watts RMS x 1, 8 Ω 800 watts RMS x 1, 4 Ω 1200 watts RMS x 1, 2 Ω Class A power output, 20Hz – 20 kHz: 25 watts, bias set to high, 8 Ω 10 watts, bias set to low, 8 Ω Dimensions WHD = 432 X 178 X 508 each Weight 29.1kg each Pictures:

Item: Parasound JC1 Monoblock Amps Location: Sydney Price: 6,500 Item Condition: Used Reason for selling: Settling in with tubes amp Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: PICKUP ONLY - NO SHIPPING. Second owner. I would like to sell these rather than being unused because I'm quite content with my tubes amp. Still have boxes available. Even though these are 400w / 8ohms each, Stereophile did a measurement test and the true numbers are somewhere around 568w/8ohms each! Very powerful solid state amps that can drive any speakers on planet earth (even Bose!). I used these to power my Dynaudio C2 and they power them without any sweat, even though Dynaudio C2 are famous for being difficult to drive. Happy to provide demo for serious buyers. The amp was designed by the famous John Curl, read up the story about this amp and you will be convinced that this is a serious piece of engineering and they did not skim with the components inside either. There are minor scuff marks on the chassis which is quite normal for amps at this age. The JC1 runs in pure Class-A up to 25 watts at eight ohms, with its bias set to high and ten watts into eight ohms with the bias set to low. These amps are still being sold on hi-fi stores in Sydney for $9,000 EACH. So grab a massive bargain, it's a no brainer to get it at this price when you could have spent $18,000 for the pair. FEATURES: Premier monaural amplifier Circuitry designed by legendary John Curl and CTC Builder Ultra-high bias Class A/AB operation Exclusive two position bias level adjustment Balanced inputs with discrete circuits and XLR connectors Vampire Direct gold-plated OFC RCA input Dual heavy-duty 24k gold-plated 5-way speaker binding posts Direct Coupled - no capacitors or inductors in signal path Complementary MOSFET driver stage and JFET input stage 18 beta-matched 15 amp, 60 MHz bipolar output transistors 1.9 kVA encapsulated toroid power transformer Independent power supplies for input, driver and output stages 18,000 μF filters for driver stage 132,000 µF Nichicon Gold Tune filters for output stage DC Servo and relay protection circuits REL and Nichicon Muse capacitors Harris hyper-fast soft recovery diodes for all bridge rectifiers Auto turn-on by 12v trigger or audio signal trigger Ground lift switch , adjustable turn-on delay 4u Chassis with rear carry handles, rack mounting kit included Premium detachable AWG 12 power cord with silver solder THX Ultra2 certified SPECS: Continuous power output, 20Hz - 20 kHz: 400 watts RMS x 1, 8 Ω 800 watts RMS x 1, 4 Ω 1200 watts RMS x 1, 2 Ω Class A power output, 20Hz - 20 kHz: 25 watts, bias set to high, 8 Ω 10 watts, bias set to low, 8 Ω Current capacity: 135 amperes peak Power bandwidth: 2 Hz - 120 kHz, +0/-3 dB at 1 watt Total harmonic distortion: < 0.15 % at full power IM distortion: balanced 16 V rms < 0.03 % Slew rate: > 130 V/µsecond Dynamic headroom: > 1.8 dB Input sensitivity: 1 V for 28.28 V, THX Reference Level Input impedance: 100 k Ω S/N ratio: >120 dB, IHF A-weighted, bias set to high >122 dB, IHF A-weighted, bias set to low Damping factor: > 1200 at 20 Hz Power Requirement : 250 watts idle 1280 watts full power into 4 Ω DC trigger output capacity : +12 Vdc, 150 mA Dimensions: 17-1/2" w x 7-5/8" h x 20" d, 7" h without feet Net weight: 64 lb. Reviews: Stereophile: https://www.stereophile.com/solidpoweramps/774/index.html Home Theater Review: https://hometheaterreview.com/parasound-halo-jc-1-monaural-amplifier-reviewed/ Enjoy the Music: http://www.enjoythemusic.com/superioraudio/equipment/1103/parasoundjc1.htm Pictures:

Item: parasound a21 Location: north sydney (waverton) Price: $2600 Item Condition:good! Reason for selling:upgrading Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Parasound A21 Halo Beautiful amp. Approx 10 years old. I am first owner and selling due to upgrade. More info A21: circuit designed by the legendary John Curl; THX Ultra 2 certified; 250 watts into 8 ohms, 400 watts into 4 ohms; auto turn-on by 12v trigger or audio signal; RCA & balanced XLR connections. Pickup only because the amp is very heavy (27.3kg). Audition before pickup welcome. Links for more information: https://www.hifinews.co.uk/news/article/parasound-halo-a21-pound;2350/10014 http://www.theabsolutesound.com/articles/parasound-halo-a-21-stereo-amplifier/ Pictures:

Item:Parasound Halo A52 Power amp Location:Melbourne,Victoria Price:$1480 Item Condition:9/10 Reason for selling: Trying class D Payment Method: Pickup - Cash, Paypal, COD Only Extra Info The Halo series from Parasound designed by the legendary John Curl this amp puts out 30 amps of current which gives it performance beyond it power rating. I dare you to find a better built, better featured and better sounding 5 channel amp for this price. It has This is a beautifully warm and organic sounding amplifier. I bought it because it was the only amp that satisfied me musically while still providing 5 channels for surround sound. I had to think long and hard before I offered it for sale. I'm trying to down scale into 2 channel and the 3 channels are wasted at the moment. I may consider a swap for 2 channel amp or mono blocks See link for review of this unit http://www.hometheat...rasound_a52.htm It is great for low impedance or hard to drive speakers like PMC, ATC and Dynaudio which I have it running now. I have original box but this Amp is big and heavy so please contact me for a shipping quote. PM for Pics

Item:Parasound Halo A52 Power amp Location:Melbourne,Victoria Price:$1700 (firm) Item Condition:9/10 Reason for selling: Because I don't know when to quit Payment Method: Pickup - Cash, Paypal, COD Only Extra Info The Halo series from Parasound has some what of cult status, being designed by the legendary John Curl. This amp puts out 30 amps of current which gives it performance beyound it power rating. I dare you to find a better built, better featured and better sounding 5 channel amp for this price (hence I'm firm at $1700) This is a beautifully warm and organic sounding amplifier. I bought it because it was the only amp that satisfied me musically while still providing 5 channels for surround sound. I had to think long and hard before I offered it for sale. It is great for low impedance or hard to drive speakers like PMC, ATC and Dynaudio which I have it running now. I have original box but this Amp is big and heavy so suggest local pick-up unless your willing to cover cost of shipping. PM me for Pics

Item: Parasound JC2 Bypass Location: Port Macquarie NSW Price: $3800, $3150 Item Condition: Used mint condition Reason for selling: It is Silver, the rest of my equipment is black Payment Method: Pickup - Cash, Paypal, Bank Transfer Extra Info: 3 years old, unused the last 6 months. I purchased a PS Audio BHK pre 6 months ago, I think the JC2 has slightly better micro details retrieval and better PRAT, the BHK has a more laid back sound, dare I say more analogue, probably mainly due to its valve input stage, honestly there is little difference between the JC2 and the BHK, and I could live with either easily. The JC2 retails at around $9k and is highly sought after by many audiophiles. This JC2 is like new and has only ever been fed clean power from a PS Audio P10 power plant. OEM Boxes, manual and remote included. Price includes freight cost to anywhere in Australia. Pictures:

Item: Parasound Halo A21 and Parasound Halo JC2 Location: Melbourne Price: SOLD Item Condition: Like New, The A21 is still under warranty and was purchased last year from Clef, the J2 was modified for HT Bypass through official Parasound channels. Comes with 2 remotes and original parts replaced through this HT Bypass mod so you could reverse the mod if you wanted. Original double boxes, manuals etc included. Reason for selling: Having a go at an Integrated Payment Method: Cash, Bank Transfer COD Only Extra Info: Pickup or ship - buyer pays, Would be willing to split but this would be a shame. Pictures: All photos are of the items for sale here

Item: 2 x Parasound Halo JC1 Monoblocks Location: Melbourne Price: $7500 Item Condition: 9/10 Reason for selling: Not used anymore Payment Method: Pickup - Cash, Paypal Extra Info: These babies have been well cared for since I purchased them from Simply HiFi 29/03/2017 as an Ex demo pair. These came with a 2 year warranty from the importer based in NSW and still have warranty to 29/03/2019. I have receipts if needed. I also have all original boxes and accessories for shipping if required. I had these shipped from W.A. to Melb with no issues. I believe current RRP on these are $8995 each. Pictures:

Any one in Adelaide with any of these amps? Just need a visit to try them on my Ambience ribbons. Usal bribery of wine or whiskey and a chance to meet plenty of audio fanatics. Cheers, Hugh

Item: Parasound P5 Preamplifier (Black) Location: Sydney (Northern Beaches) Price: $1100ono Item Condition: 9/10 Reason for selling: Moved over to MiniDSP for even more/finer sub control in a difficult room/house Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Pick Up Only At This Stage. It has spent its life in my rack cabinet. Comes with original remote. NO original box or power cord. Pictures:

Item:Parasound A23 power amp Location:Goldfields Victoria Price:$900 firm. Item Condition: Excellent Reason for selling:Abundance of equipment. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: An excellent example of the Parasound A23 power amp in silver. Everything is ship shape and Bristol fashion on this powerful beauty. We are mostly Audiophiles on these pages, and I'm sure we all know the quality of Parasound. This comes with original shipping cartons and manuals. Buyer pays shipping. Pleased to audition. Pictures:

Item: Parasound Halo A21 Power Amplifier Location: Kew, Vic Price: $2000 firm Item Condition: Excellent Reason for selling: Not needed Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Fantastic amp, sounds amazing with all speakers I have tried it with. 250w into 8ohms and 400w into 4. Purchased from a fellow SnAer. Weight about 28kg. Local pickup only. Pictures:

Item: Parasound New Classic 2250 THX Power Amp Location: Melbourne Price: $1500 Item Condition: Excellent 9/10 Reason for selling: Need money for house Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Parasound New Classic 2250 Power Amp in excellent condition. Look on the net for info on these. The New Classics are the best value for money gear you can buy. The specs are similar to the Bryston 4B in terms of power. Rated at 250W x2 into 8 ohms, 400W x2 into 4 ohms, and 700W x 1 mono. Very versatile amp, THX Ultra 2 certified, can be bridged into mono, has RCA loop for adding more equipment, 12V trigger so ideal for custom home theater installations. Pictures:

Item: Parasound New Classic 2250 THX Power Amp Location: Melbourne Price: $1200 Item Condition: Excellent 9/10 Reason for selling: Upgrading HT system Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Parasound New Classic 2250 Power Amp in excellent condition. Look on the net for info on these. The New Classics are the best value for money gear you can buy. The specs are similar to the Bryston 4B in terms of power. Rated at 250W x2 into 8 ohms, 400W x2 into 4 ohms, and 700W x 1 mono. Very versatile amp, THX Ultra 2 certified, can be bridged into mono, has RCA loop for adding more equipment, 12V trigger so ideal for custom home theater installations. I bought this for a HT project, but that project is getting scrapped due to a new house (fingers crossed). Pictures:

Item: Parasound JC-1 x 2 Location: South Coast, NSW Price: $7000, cut and paste error.. Item Condition: Excellent Reason for selling: Wilson Speakers Stolen, no need for these anymore Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: 4 years old, unmarked, silver. Serious amplifiers will drive any (and I mean any) speaker. Rarely used (away with work for the last two years). Pictures: Currently in original boxes and have been since December 2016.

Item: Parasound A21 Power Amplifier Location: Gosford will ship Price: $2000 Item Condition: few marks but 100% operationally. Reason for selling: Not used. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Superb sounding amplifier. Cosmetically it is stained in some areas with something that I just can’t remove, no matter what I use. Luckily it seems to be mostly on the rear panel. This model also has outputs on each channel at the rear to run additional Amplifiers or active subs. Each output has its own attenuation so you can tailor the output to match the equipment. Sound quality is dynamic and with excellent bass drive. Midrange is on the warm side and highs are clear and extended with very little coloration. Hard to beat st this price IMHO Link to specs here http://www.parasound.com/a21.php Product DescriptionHalo A21 Two-Channel AmplifierContinuous power output (20 Hz - 20 kHz): 250 watts RMS x 2 at 8 ohms, 400 watts RMS x 2 at 4 ohms, 750 watts RMS x 1 (bridged mono mode) at 8 ohmsCurrent capacity: 60 amperes peak per channelPower bandwidth: 5 Hz - 100 kHz, +0/-3 dB at 1 wattTotal harmonic distortion: < 0.2 % at full powerIM distortion: < 0.04 %Slew rate: >130 V / µsecondDynamic headroom: > 1.5 dBInterchannel crosstalk: > 80 dB at 1 kHz; > 63 dB at 20 kHzInput sensitivity: 1 V for 28.28 V, THX Reference LevelInput impedance: 33 k ohm unbalanced; 66 k ohm balancedS/N ratio: > 112 dB, input shorted, IHF A-weightedDamping factor: > 1100 at 20 HzVoltage: 110V – 120VDimensions: 17.25" wide, 7.625" high (7" without feet), 19.12" deepNet weight: 60 lbs. Pictures:

Item: Parasound Z amp V.3 small form power amp Location:Brisbane 4053 Price: $290 + shipping BARGAIN Item Condition:9/10 (Like new.) Reason for selling:Funding Tubes. (Funding more equipment , So this has got to go.) Payment Method: Pickup - Cash, Paypal, Bank Deposit & Happy to Post Extra Info:I used this on my desktop as a headphone amp.It sounds very detailed and has plenty of power to drive most headphones.Combine that with its specs at 45wpc into 8ohms & 60wpc into 4ohms in a chassis approx 5cm high & the size of a A4 sheet ,You have a compact and powerful desktop amp/headphone amp combo. I purchased it from another SNA member Tobes who purchased it new not long ago.Its in like new condition.Its priced it to sell. I really enjoyed its clear detailed sound. Head-fi have given it a review below- https://www.head-fi.org/showcase/parasound-zamp-v-3-two-channel-amplifier.21937/reviews FULL SPECS HERE- http://www.parasound.com/zamp-v3.php# It comes with power lead and all its original double boxing to post safely. Link below is the Thread I purchased the amp from. Pictures:

Item: Parasound P5 Location: Perth WA Price: $1400 RRP $2195 Item Condition: Used (9/10) Reason for selling: Excess to Need Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Current RRP is $2195 https://www.apollohifi.com.au/parasound-halo-p5-2-1-channel-pre-amplifier-sil.html Hard to find in the used market. This is the preamp that is not pretentious but does everything exceptionally well. There's not many (none) preamp out there that does all that the P5 does with the sonic quality that it produces. Analog inputs: It has Stereo Balanced XLR inputs & regular unbalanced (RCA) inputs, Digital inputs: usb, coax and optical digital inputs which run through a Burr-Brown PCM1798 DAC Excellent Phono stage Home theatre bypass capability so can seamlessly integrate into a multi-channel system Best feature: Dual subwoofer outputs so you can run a two channel system with subwoofers. Remote control Read the review here: https://www.stereophile.com/content/parasound-halo-p-5-21-channel-da-preamplifier It's in flawless, absolutely as new condition but I don't have the original box. So local pick up preferred. Pictures:

Item: Parasound A-21 Amplifier Location: Melboune / N.E. Victoria Price: $2150 Item Condition: Very Good Reason for selling: Not being used Payment Method: Pickup - Cash, Paypal, EFT Extra Info: Donation to SNA on sale I have one of the popular Parasound A21 amps that I am not using, so someone else should make use of it. I purchased this from an SNA member in February 2016 but have hardly used it as I have two many other power amps. It works as it should and sounds quite nice. I do not have a box or manuals as this is how it was when I picked it up. The actual amp is currently on loan to a SNA member in Melbourne so the images here are from when I purchased it. I am picking it up tomorrow so if someone in Melbourne is quick I can drop it off tomorrow, otherwise I will bring it home back to N.E. Victoria and have to make other delivery arrangements. At this stage I am not interested in shipping but can drop off in Melbourne either tomorrow or sometime next week. I would also be willing to take it to Adelaide (as I am going there anyway) next week. http://www.parasound.com/a21.php http://www.theabsolutesound.com/articles/parasound-halo-a-21-stereo-amplifier/ Pictures:

Item: Full Digital Front End Stereo Setup Location: Ferntree Gully Victoria Price: $4500 Item Condition: Excellent Reason for selling: Downsizing Payment Method: Pickup - Cash, Extra Info: Expertly built by an IT professional with over 22 years experience, each component has been hand picked and assembled over many hours of research to reduce digital glare and produce linear power supply quality using switch mode power supplies. If you are looking for a great entry into the wonderful world of High End Digital using a wide range of digital players then look no further. All items come with their original boxes. Job 225 Power Amp Imported from Switzerland. Parasound ZDac. QED interconnects. Breeze Audio Reclocker upgraded with Talmea transformers running XMOS USB interface. HTPC Specs: XEON E5-2603 V3 running at 1.6HZ 15MB Cache with AVX2 instruction set. Asus X99-A Motherboard running latest bios. EVGA SuperNOVA 1000 G3 Low Ripple Power Supply. GSKill 16GB PC2400 DDR4. Noctua U9S CPU Cooler. Nvidia GT 610 Fanless Video Card. Silverstone Case. Samsung 960 EVO NVMe M.2 250GB SSD. Windows 10 Pro. Speaker Specs Synchrony Two Tower 34-23,000Hz 36-20,000Hz 36-10,000Hz 29Hz 88dB 90dB 4 Ohms 4 Ohms 20 - 300 Watts 300 Watts 1” (25mm) Titanium Dome with Ferrofluid Neodymium Magnet 3 x 5 1/4” (133mm) Dual Layer Fine Weave Fibreglass Natural Fibre Cone Rubber Surround 2,200Hz, LR4 1.8 cu ft (51L) Triple Port Bass Reflex 7 5/8 x 39 1/4 x 11” * 192 x 994 x 279mm 46lb (20.9kg)/each 55.8lb (25.4kg)/each Black Ash Temperered Glass adjustable stand included Pictures: