Search the Community
Showing results for tags 'moving magnet'.
Found 4 results
Item: RJM Audio VSPS Moving Magnet DIY Phono Stage Location: Perth Price: Withdrawn from sale Item Condition: Working perfectly, some scratches on cases Reason for selling: Now using MC Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Excellent sounding phono, used for six months, built about two years ago. The cases are thin Aluminium, but have brass or Titanium plates at connector points. Materials used: RJM VSPS and Dual-Bridge Rectifier kits, Dueland wiring for signal paths, Arizona Blue Cactus 2.2uF 200VDC output capacitors (with bypass caps), Altronics transformer, Furutech Rhodium FI-03 IEC inlet with fuse, 2 x Aluminium cases, Stillpoint ERS tape around power cable (light blue) in phono case, Gold coated pure Copper RCA plugs, 2 cm slate pieces under circuit boards and transformer, brass (front) and Titanium plates (rear). Well over $200 of materials used. http://phonoclone.com/diy-pho5.html http://phonoclone.com/pcb.html http://phonoclone.com/diy-guide.html ELECTRICAL DISCLAIMER This product has not been manufactured by a qualified individual or company, therefore contains electrical circuits that do not necessarily comply with Australian Standards. I understand that as the seller, I may be liable to repercussions in the event of equipment failure. By advertising and selling this product, as the seller I also agree that I am solely liable, and the publisher of this website takes no responsibility for any injury or death resulting from, whether directly or indirectly, any accident that may happen as a result of the failure of the product being sold. If in doubt, seek the services of a qualified electrician to inspect the product to ensure it is safe for use. Photos: Advertisements without photos of the actual item will not be approved.
Item: Lejonklou Giao Moving Magnet Phono Stage & Hagerman Piccolo 2 Head Amp (selling as a combo). Location: Sydney, NSW Price: $680 Item Condition: Near Mint Reason for selling: Not using! Bought out of curiosity. Payment Method: Pickup - Cash & Paypal Extra Info: This phono combination made headlines in 2017 when Michael Fremer of Analog Planet invited readers to conduct a blind listening test using a number of combination of Moving Magnet Phono Stages and Head Amps. The combo beat all other combinations hands down. I personally picked this combination as the clear winner and was not surprised that a majority of readers liked it too. Here is the article where you can read more about it: https://www.analogplanet.com/content/perhaps-you-should-buy-mm-only-phono-preamp-if-you-are-using-mm-cartridge It cost me about $1,300 to import both items. I'm selling as a combo because I think it would be a shame to separate the 'audio voodoo' that this phono solution offers. Please feel free to ask any questions.
Item: Yaquin MS22b - Nice little phono stage, responsive to a range of MM cartridges - I like it with the Stanton range Specifications: ●Tubes: 12AX7B × 2 ●Output Voltages: 0.5V (400Hz input) ●Output Jacks: One group of gold plated RCA jacks ●Input Sensitivity: ≤4.0mV (400Hz, 0.5V output) ●Input Jacks: One group of gold plated RCA jacks plus a grounding terminal ●Signal Noise Ratio: >85dB (A weight) ●Distortion: ≤0.11%(400Hz input) ●Power supply voltage: 110/220V 60Hz/50Hz ●Dimension：200H * 170W * 125L（mm） ●Gross weight：3.3kg Location: Bunbury South West WA Price: $150 (firm) Item Condition: As new Reason for selling: Surplus to needs Payment Method: Pickup - Cash, Paypal, Direct Deposit Extra Info: Review here: https://forums.stevehoffman.tv/threads/i-review-the-175-tubed-yaqin-ms-22b-phono-preamplifier.267043/ Photos: Advertisements without photos of the actual item will not be approved.
Item: AIME AUDIO MM/MC Phono Amplifier SE-P2 Location: South East Vic Price: $1000 Item Condition: New Reason for selling: Upgrade to SE-P3 Phono Multi Curve Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: AIME is abbreviation for Audio Image Musical Experience and it is pronounce as 'AIM' with silent E. Designed by a Hi-Fi enthusiast - audiophile who is based in Kuala Lumpur. All AIME product is custom handmade by audio technician. SE-P2 Introduction SE-P2 Phono amplifier is produced in small numbers and sonically superior to mass industry products. The AIME SE-P2 Phono amplifier has both MM and MC stage. SE-P2 is compatible with practically all available cartridges on the market from High Output MM to the lowest output MC cartridges. To maintain very low noise, the chassis is fitted with isolation feet to reduce vibration. The chassis is made from solid aluminium (up to 6mm thickness) to shield electronics from magnetic field interference. SE-P2 has user selectable gain settings for 40-57 db for MM and gain setting from 51-68 db for MC. This settings are easy to select by the user by slotting in the right gain 2 pin jumper available on printed circuit board. The SE-P2 has been designed and made to provide you sound clarity, large sound stage and best sound from your record player. Here are some of the specifications: Specially selected transistors for low noise Discrete Class A zero feedback output stage Each gain stage buffered by fast parallel voltage regulators Resistors and capacitors (input loading) adjustable All electrolytic capacitors in the audio section are Low ESR and is specially selected for their sonic texture Multiple gain structure selectable by the user Specially selected low noise toroidal transformer Specially snubbed capacitors for each diodes for each secondary coil Pre-regulator circuits for the additional low noise effect Very low noise regulated voltages Shielded cable between power supply and audio section High quality RCA connectors 240V AC mains voltage with fuse Preamp has selections for various capacitor loading (4 variations): 6) 1K * SE-P2 demonstration is available on request. Pictures: