Search the Community
Showing results for tags 'melbourne'.
Found 4 results
Item: Bluesound Node 2i Location: South Eastern Suburbs , Melbourne Price: $615 ( excl. postage, best if someone local picks up as the box is a bit wide but i can find out postage if you want me to) Item Condition: Excellent, 6 months old with receipt of original purchase (showing $895 as price paid) and packing materials Reason for selling: No longer needed, was a great way to dip my toes into streaming and also making a NAS work. But now I would like to get a bit higher end product and see where it takes me. Payment Method: Pickup - Cash, COD Only Extra Info: Happy to throw in my RCA connects and an optical cable, which I will no longer need. Photos: Advertisements without photos of the actual item will not be approved.
Item: Krix Harmonix Mark 1 speaker pair Location: South Eastern Suburbs, Melbourne Price: $999 Item Condition: Used, about 6 years old. These are my main speakers. I listen to them everyday and love them for the sound and looks. I don't have the boxes. Reason for selling: Looking to raise funds towards upgrade Payment Method: Pickup - Cash, Pickup-Bank transfer prior Extra Info: Note the subwoofer and the isolator feet (isoacoustics gaia iii) in the photos are not for sale. The subwoofer I am keeping and the isolator feet i can only offer for sale only once speakers are sold. Specifications: Frequency Range 30Hz - 20kHz in room response Power Handling Maximum 180 watts RMS amplifier power Sensitivity 90dB for 2.83 volts at 1 metre Configuration 4 driver 3-way bi-wirable / bi-ampable Bass Drivers 2 x nominal 165mm (61/2”) laminated polypropylene cones. 33mm (11/4”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion Midrange Driver 1 x nominal 130mm (5”) coated paper cone. 26mm (1”) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion Tweeter 28mm (1”) doped fabric dome. Ferro fluid cooled. Double magnet shielded Crossover Point 340Hz & 2.2kHz Impedance Nominally 4 ohms Enclosure Type Dual chambers - sealed midrange chamber, with bass reflex main chamber, front vented with internal / external flaring Dimensions 1060mm high x 220mm wide x 355mm deep Material 17mm MDF enclosure, heavily braced Finish Vinyl or lacquered timber veneer Volume 44 litres internal Weight 28kg each Photos: Advertisements without photos of the actual item will not be approved.
Item: Audio Note OTO SE tube integrated amplifier Location: 3183 Price: 1900 Item Condition: good working order Reason for selling:too many amps Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: The item is in good working order and condition. The amp recently was Refurbished. All capacitors were checked to meet requirements. This is a Class A amplifier. Output tubes 4 x EL84 (6P14P, etc), 10 watts per channel. All four EL84 tubes of power amp are new. Photos: Advertisements without photos of the actual item will not be approved.
Item: Infinity Primus PS-8 Subwoofer Location: 3183 Price: 180 ono Item Condition: good Reason for selling: upgraded to bigger one Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Great sound and, besides a small dent in the speaker cone, great condition. Infinity PS-8 Subwoofer Features and Specs Enclosure Bass Reflex Video Shielded No Woofer Size (inches) 8 Woofer Composition M.M.D. Firing Direction Front Wireless No Preamp-Level Inputs 3 Speaker-Level Inputs Yes Speaker-Level Outputs No Low-Pass Crossover Freq 50-150 Hz High-Pass Crossover Freq None Phase Switch Yes Amplifier Output (watts) 100 Frequency Response 35-150 Hz DIMENSIONS & WEIGHT Width 10.6 in Depth 16.8 in Height 17.5 in Weight 33.07 lbs Features Metal Matrix Diaphragm (M.M.D.): Derived from the C.M.M.D. material used in Infinity's flagship Prelude drivers, M.M.D. features a stiff aluminum core that provides exceptional strength and rigidity for clean, realistic low-frequency tones. Amplifier: The 8" M.M.D. front-firing cone woofer is powered by a 100-watt (RMS) amplifier. Surround: For a smoother response and improved durability, the woofer uses a rubber surround. Bass Ports: There are two rear-firing bass ports that allow deep bass with high acoustic efficiency and low distortion. Gain Control: The subwoofer has a rotary control on the rear panel for adjusting the level of the bass. Phase Switch: The subwoofer's phase switch allows you to control the phase of the subwoofer's output relative to the front speakers. If the bass sounds muddy or unclear, toggling the phase control can sometimes strengthen the bass "attack." Auto On/Off Circuit: The auto on/off circuit turns the power amp on when a signal is sensed and turns the amplifier off and into standby mode approximately 10 minutes after a signal is no longer received. An LED indicator on the rear panel glows green when the amplifier is on and red when the amp is in standby. Low-Pass Crossover: The subwoofer features a continuously variable 50Hz-150Hz low-pass crossover that determines the highest frequency at which the subwoofer reproduces sounds. The crossover has a 24dB/octave slope. Inputs and Outputs Notes Line-level Inputs: The subwoofer has a gold-plated LFE input and gold-plated stereo RCA inputs. If you have a Dolby Digital/DTS receiver or processor with a low-frequency-effects (LFE) output, you should use the LFE input on the subwoofer. If your receiver/processor does not contain a Dolby Digital or DTS processor but has a subwoofer output, you must use the stereo RCA inputs. If the receiver/processor has a mono subwoofer output, a "Y" adapter is recommended to maximize performance. Speaker-level Inputs: The left and right gold-plated 5-way binding posts allow you to connect the subwoofer to a receiver/amplifier using speaker wire. Photos: Advertisements without photos of the actual item will not be approved.
Currently Active Ads
Total Sales (Since 2018)
Total Sales Value (Last 14 Days)
Total Ads Value (Since March 2020)