Search the Community
Showing results for tags 'mc7300'.
Found 1 result
Item: McIntosh MC7300 Location: Sydney Price: $4,900 Item Condition: Excellent Reason for selling: Downsizing Payment Method: Pickup - Cash Extra Info: This amp has served me well for some years and I'll be sad to see it go . Probably the most reliable amp I've ever owned. The only thing that has ever failed on it are the light bulbs behind the faceplate (which is a thing on these older Macs) which does not affect operation in any way. It has never skipped a beat. I had the lightbulbs changed recently so also had it serviced while it was in. I have included a pic of all the caps that were replaced. Also still have 12 new bulbs for when the time comes. Cosmetically is in very good condition with a few minor blemishes and functionally sounds as good as the day I got it. Also have original manual in excellent condition. You can drive almost any speaker with this amp. This amp has been well looked after and is guaranteed to put smiles on faces for years to come Form Stereo power amplifier Output Stereo: 300W+300W (a sinusoidal consecutive output, load-impedance 2/4/8ohm) Mono-bridge: 600W (a sinusoidal consecutive output, load-impedance 4/8/16ohm) Mono-parallel: 600W (a sinusoidal consecutive output, load-impedance 1/2/4ohm) Output load impedance Stereo: 2 ohm, 4ohm, 8ohm Mono-bridge: 4/8/16ohm Mono-parallel: 1/2/4ohm Output frequency band 20Hz - 20kHz THD Stereo: 0.005% or less (at the time of 20Hz - 20kHz, 250mW-300W, and both channel drive) Monophonic recording: 0.005% or less (at the time of 20Hz - 20kHz, 250mW-600W, and both channel drive) Cross modulation distortion (at the time of 20Hz - 20kHz, and both channel drive) Stereo: 0.005% or less (a one side channel and less than peek 300W) Monophonic recording: 0.005% or less (it is attached to a one side channel and is less than peek 600W) Frequency band (at the time of 1W output) 20Hz - 20kHz, and +0 -0.25 dB 10Hz - 100kHz, and +0 -3.0 dB SN ratio 105dB or less (at the time of an Output power A Wei Ted) Dynamic head room 1.9dB(IHF) Dumping factor 40 or more Input impedance 20kohms (unbalance) 40kohms (equilibrium) Input sensitivity 2.5V and 1.4V switching Power guarding It is less than THD2% to over-drive 14dB at 1kHz. Power source AC100V, 50Hz/60 Hz, 0.6A-13A Dimensions Width 443x height 196x depth of 420mm (termination included) Weight 35kg Photos: Advertisements without photos of the actual item will not be approved.
Currently Active Ads
Total Sales (Since 2018)
Total Sales Value (Last 14 Days)
Total Ads Value (Since March 2020)