Search the Community

UPDATE: Sold via Marketplace Further Information: Selling the following 3 items for car audio as a bulk lot. Amplifier: DLS Reference RA50 4 x 70 W + 1 x 265 W Condition: Good Product Website: https://www.dlsaudio.com.au/product/reference-ra50-4-x-70-w-1-x-265-w/ 3 way split speakers: DLS Ultimate UP36i Condition: Slight indentation on woofer speakers in transport (see picture); midrange covers modified to fit in original car (see picture) Product Website: https://www.dlsaudio.com.au/product/ultimate-up36i-3-way-65-inches-component/ RRP: https://lifestylestore.com.au/product/dls-audio-upi36-6-5-component-speakers/ Subwoofer: JL Audio 10W6v2-D4 Condition: Good Website with Specifications: https://www.crutchfield.com/S-MRMwAwDZxoG/p_136106V2D4/JL-Audio-10W6v2-D4.html Sale includes cabling which was used in original install

DLS Ultimate Tube Amplifier TA2. I have 2 amps - this is for 1. Excellent condition. ULTIMATE series TA2 is a HiFi two-channel amplifier with 2 x 100 Watts output power. This is an extremely well-sounding amplifier for car use. We did not compromize in any section of the construction when we designed the electronic circuits. The TA2 is using the very best components in all sections of the amplifier, from the input circuitry, through the whole amplifier to the final output stage. Two pieces of CV4010 pentodes is used in the signal path. These tubes are made by VALVE Electronics in England during 1982 - 1984. The Valve Electronics company produced best sounding tubes in the tube industry before they closed. The tubes are spare parts for military equipment so they fulfil military specifications. We use silver wire Capacitors in signal path and power supply for a focused sound image. Special designed DLS Audio capacitors in key points and WIMA polypropylene capacitors. Four pieces of 4700 uF on each channel for a deep and wide sound stage. Dual mono power system design plus separate power supply for tube and pre-amp stage for clear sound reproduction. - RMS output per channel @ 13,8 volts, 20 Hz - 20 kHz , Separate level controls for each channel. Specifications Number of channels 2 Amplifier class AB Output power in 2 ohm 2 x 200 W RMS Output power in 4 ohm 2 x 100 W RMS Damping factor >240 S/N ratio, A-weighted >102 dB Frequency range 10 Hz - 50 kHz Input sensitivity 0,5 - 7V Input impedance > 10 kohm High pass filter 20 - 200 Hz, 12 dB slope Low level output No Remote bass level control No Remote phase shift control No High level input with auto start No Integrated fan No Power consumption (idle) 1,5 A Power consumption (max) 40 A Rec. power cable Minimum 5AWG / 16 mm2 for each channel / kanal Dimension (W x D x H) 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch) Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item