Search the Community
Showing results for tags 'at95e'.
Found 1 result
Hi all, Sorry if this is in the wrong section, but I wanted to reach out to any of you happy modders out there that can hopefully shed some insight... After an accidental incident a member of my family had with the needle on my TT, I need to order a new stylus (needle arm snapped off completely off the cantilever) I currently am using a AT95E cart, and since I need to replace the stylus, thought I'd get the ATN95EX dark red stylus over the standard ATN95E green one. The only difference I can see is (apart from being a few $$ more) is the diamond tip is smaller on the EX being 0.3 x 0.7 compared to the stock 0.4 x 0.7 on the green E, so hopefully this should translate into better tracking and 'sound'. But, whilst I wait for this, I thought I should see if I can do some quick mods to improve the cart... so after googling on the interweb there are quite a few 'experimentalliers' that have tried different ideas to squeeze more audio joy from the AT95E with varying amounts of success. Im not too keen on the whole making up custom wood frames and sticking tape, blu-tak, etc on the outside of the cart as Im trying to keep the 'factory fresh' look, and as the TT is a bit of a show-piece, the MRS wouldnt be too keen on a cruddy looking 'thingy' stuck on the end of the tonearm... So, I read about potting the cart with wax or lipstick, etc, to help deaden resonances. And with the term 'simple' attached in the sentence, this caught my attention. But how? Is it filling the internals of the plastic mount that the cart body screws into (there are a couple of voids that could be filled), or somehow filling the internals of the cart body itself? If its the latter, I cant see how this would be 'simple' as the cart body is housed in a 'one piece' pressed metal enclosure, with only a seam on the top, which I would be very hesitant about trying to pry open to reveal the guts. So has anyone done this 'potting' technique? Could you please explain what is involved, and probably more importantly, was it worth it? Did it bring more life into the AT95E? And any other simple mods worth trying? (another one I think I read was blu-tak between the cart body and stylus) Not too keen on filling the needle tip (another mod I read about) too delicate for me to attempt... Eventually, I'll probably upgrade to a AT100E cart as at least then it opens they way to more stylus options later, but for now, if I can squeeze some more out of the AT95E... Sorry for the long thread, I do tend to dribble a bit when trying to explain something. But looking forward to any helpful advice. Thanks.