Jump to content

punkindrublic

Full Member
  • Content Count

    26
  • Joined

  • Last visited

Community Reputation

3 Neutral

About punkindrublic

  • Rank
    10+ Post Club

Profile Fields

  • Location
    Adelaide
  • Country
    Australia

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. no I'm busy, and project didn't reply to me 😐 with regards to someones earlier post, I can actually hear the noise without a record on when I listen up close to the turntable. will try and get a spirit level soon to see if its ever so slightly off balance.. oh and the lubricant post above might help.
  2. lol its just a random old leonard cohen. the knock only occurs if the needle is in a groove. il wait for project audio to get back to me, should have emailed them first. thanks for the help
  3. the turntable is a project RPM 3 carbon, I just emailed project so maybe they can help, i've been putting up with it for a long time now but finally trying to fix it
  4. Oh it’s there! Lucky number 3 will here it, and it’s on every record between the tracks especially
  5. You might need headphone to hear it best, it is lower frequency
  6. sorry, this will work https://drive.google.com/file/d/1Ox5G0BUGsUfXTx3YwEL1oEUyapUp9Dh7/view?usp=sharing
  7. https://drive.google.com/file/d/1Ox5G0BUGsUfXTx3YwEL1oEUyapUp9Dh7/view?usp=sharing
  8. yeh mine is a plastic one which you have to balance. This is what the tonearm is looking like without a record to rest on, is that looking normal?
  9. last night I tried pushing the counter-weight as far back as it would go (seat position on a see-saw) to bring the stylus up a bit. I seem to remember it being higher, its not hitting so maybe ok.. photos are hard to take/convey
  10. This is my set-up Pro-Ject RPM 3 Carbon Turntable with Ortofon 2M Silver Cartridge rega phono mm mk3 Yamaha RS202B (weakest link I think) KEF Q350 I think the silver stylus is nearly gone as the cartridge is almost touching the vinyl, though I've only had it 8 months now. I paid $550 for the turntable, the 2m blue stylus is nearly half that.
  11. how did this project turn out? i would love to see a DIY guide / aussie shopping list to get it done. I can't see any wooden blocks at bunnings
  12. can you put prices on all those cd players. I need a cd player as well
  13. why is it so expensive when its cheap here? i guess the outer shielding, terminals and labor? https://www.lenc.com.au/products/audioquest-rocket-11-speaker-cable
  14. funny that the jaycar cable is 50 ohm, and that table only goes up to 8 ohm.
×
×
  • Create New...