ZGojira

Further Information: 1st gen Slight angle on the USB-B connector, but functions perfectly.

Further Information: Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable

Further Information: Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable

Item: Filtered Powerboard + 2 Shielded Power Cables Price Range: Free Item Condition: Used Extra Info: Sydney/Hurstville I found them at the back of an old cupboard in preparation for renovations. Never been used by me. Powerboard has US plugs but been re-terminated to AUS plug. Will throw in a US plug if you want to re-terminate it again. 2x Shielded power cables are US Plugs to IEC Please don't forget to report your post as FOUND when possible. (You can now delete this text).

On hold.

Further Information: Originally used with Holo Spring, now upgraded to Holo May + Holo Red The LPS uses components that matched the Holo Spring Wildism Edition

Further Information: Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable

Further Information: 1st gen Slight angle on the USB-B connector, but functions perfectly.

Further Information: Advanced version, output current is 800 mA, which is good for all high current USB device interfaces Regeneration of USB power. Power from the computer USB ports are very noisy with a level higher than several mV. Titanis inverts and processes power from the USB source. The regenerated power noise level is only 8 uV, rendering the Noise level reduced by about 1/1000th. Titanis is an active USB processor, and is different from the old USB filters which you may have tried before. The filter is composed of simple LC passive components, the output signal is all dependent on the input. Unlike others, Titanis is an active device, and the output is not affected by the strength of the input. Titanis does not require device driver, however some devices may need to reinstall a device driver after connecting to Titanis. All USB devices can be connect through Titanis, e.g. mouse and keyboard… etc, it can enhance PCHIFI system performance. The two main functions of Titanis. Regeneration of USB power. Power from the computer USB ports are very noisy with a level higher than several mV. Titanis inverts and processes power from the USB source. The regenerated power noise level is only 8 uV, rendering the Noise level reduced by about 1/1000th. Rebuilding the signal from the USB port. In the computer, the signal consists of a large amount of interference and jitter due to the complicated EM environment and power supply conditions. Titanis receives the signal from USB and puts it in a local buffer, with the use of a local high quality clock, regenerates the USB signal and sends it to output.

Further Information: 1st gen Slight angle on the USB-B connector, but functions perfectly.

Further Information: Mutec MC 3+USB needs no introduction at this point Very versatile device. Official page: https://www.mutec-net.com/product_mc-3-plus-usb.php

Further Information: Originally used with Holo Spring, now upgraded to Holo May + Holo Red The LPS uses components that matched the Holo Spring Wildism Edition

Further Information: Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable

Further Information: No longer required due to upgraded to the Audio-GD DI-20. Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable Photos:

Further Information: No longer required due to upgraded to the Audio-GD DI-20. Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable Photos:

Further Information: No longer required due to upgraded to the Audio-GD DI-20. Supports USB and Coax input Coax out (RCA and BNC) Powered through USB or included PSU More information at: http://www.audio-gd.com/Pro/dac/DIv3/DIv3EN.htm Includes: Audio-GD DI-V3 DDC Audio-GD DI-PSU Upgraded DC power cable IEC power cord USB cable Photos:

Item: Sennheiser HD700 Headphone Price Range: $300 - $400 Item Condition: New or Used Extra Info: Looking for a clean pair of stock Sennheiser HD700 (i.e. no mods, with original cable, ear/head pads, and box).

Updated to clarify that the listed price is for all 3.

Further information: 3x 1.5m Shielded Power Cables AU to C15 Plug Purchased online a couple of years ago, have upgraded since. Price is for all three cables.

LCD2's could also be of interest. They pop-up semi regularly in the classifieds used for under 1k.

Further information: Topping NX4 DSD ES9038Q2M XMOS-XU208 Portable USB DAC/AMP Review: https://www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-topping-nx4-dsd-dac-and-portable-headphone-amplifier.3507/ Specifications: DSD:PCM768，DSD512 DSD:Native,DOP Analog input:1 x 3.5mm(share with analog output) Analog output:1 x 3.5mm(share with analog input) Headphone output:1 x 3.5mm Playback time:Approx 28 hours (only headphone amp) Approx 7.5 hours (USB DAC + headphone amp) Headphone output: 293mW Distortion: 0.0009% (140mW) Gain: 0dB.8.8dB Noise floor: 2.5uV 6.5uV 293mW x 2 @ 32Ω 114mW x 2 @ 300Ω Decoding SNR: 119dB 16-32bit / 44.1-768kHZ DSD64-DSD256Dop DSD64-512 (native) Net weight: 148g (unit only) Dimensions:Approx 11CM x 6.8CM x 1.4CM Suitable Headphone Impedance:16-300Ω Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

Further information: Belden XLR cable, 1m length. Used only for testing, under 1hr use. Price is for the pair.

Further information: Monster XLR cable, 1m length. Used only for testing, under 1hr use. Price is for the pair.

Without setting off another heated debate.....I think a good way for you to find out is to try using another RCA cable (assuming you have one) in place of your current one, and see if you can hear a difference. If you do hear a difference, then continue to investigate into whether you want a coax cable.

Further information: Topping NX4 DSD ES9038Q2M XMOS-XU208 Portable USB DAC/AMP Opened, tested working, and put back into box. Decided to get a DAP instead of using phone+DAC/amp. Review: https://www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-topping-nx4-dsd-dac-and-portable-headphone-amplifier.3507/ Specifications: DSD:PCM768，DSD512 DSD:Native,DOP Analog input:1 x 3.5mm(share with analog output) Analog output:1 x 3.5mm(share with analog input) Headphone output:1 x 3.5mm Playback time:Approx 28 hours (only headphone amp) Approx 7.5 hours (USB DAC + headphone amp) Headphone output: 293mW Distortion: 0.0009% (140mW) Gain: 0dB.8.8dB Noise floor: 2.5uV 6.5uV 293mW x 2 @ 32Ω 114mW x 2 @ 300Ω Decoding SNR: 119dB 16-32bit / 44.1-768kHZ DSD64-DSD256Dop DSD64-512 (native) Net weight: 148g (unit only) Dimensions:Approx 11CM x 6.8CM x 1.4CM Suitable Headphone Impedance:16-300Ω Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.