Jump to content

big_marcelo

Member
  • Posts

    2,657
  • Joined

  • Last visited

Posts posted by big_marcelo

  1. I found it useful, upgraded from the SD version.

    Having said that, be aware that the HD version has no real instructions on the disc (the SD version has a voiceover telling you how to use the various test patterns).

    There is a mighty big instruction book downloadable from their website though.

    I have both, and having seen both - I reckon one version would probably be good enough for 99% of what most people would want it for....

  2. I don't know why Mario is so worry about the video processing of all these receivers. I know he has DVDO VP50 and he can

    just let VP50 doing all the video processing and let the AVRs working on the sound. I think he should just go with a 805.

    the thing for me is if I want to either sell the onkyo or keep it for another room, the Reon could be a plus... and I would like to test the onkyo noise reduction in conjuction with the VP50 to see how they work together... before I even contemplate moving to a VP50 Pro purely for its noise reduction ability .....

    sonically, with my current setup, I'm pretty happy with the yamaha 2500 ... its just part of the upgrade cycle.... coming to 3 years... time to upgrade...

    cheers,

    Marcelo

  3. Then go with the 905 as there is no capability to control the video processing on the 875, it has been crippled in this respect.

    yes, I'm leaning towards the 905, but it depends on price in the end.... I'm 90% sure it'll be the 905 ....

    in terms of processing, I'll let the DVDO do most of the processing for me... but I think the Reon would be a 'nice to have' feature for the amp...

    I never used the yamaha for video, only for audio ... and I'll probably keep the set up the same way ....

    I do prefer the looks of the yamaha versus the onkyo, no doubt.... but the more I read, the more I like the Onkyo...

    I haven't been to a place where I can evaluate them side by side.... I've seen the 3800 and the 875... not the 905 .... very hard to compare sound quality if not side by side and with the same acoustic environment and speakers ....

  4. i saw this on another forum "

    "Preorder Halo 3 cheap

    1) Get this: https://dstore.com.au/promo/paypalfathersday07 $15 0ff voucher if you use paypal for orders over $75

    2) Dstore has $1 delivery until midday 24/8/07 (now it's $6)

    3) Preorder Halo 3 at dstore.com.au ($81.95) , apply coupon and pay by paypal

    4) Final price = $67.95 delivered " (now it's $82-15+6= $73)

    or you can get bioshock for $80 .....

    this looks like a reasonable deal ?

    Great, just pre-ordered mine! $72 delivered ... not bad

    Cheers,

    Marcelo

  5. is anyone else also getting a little lipsynch from the transmission? no other 5.1 FTA HD show gives me lipsynch issues.... so I guess, it must be a 10 issue, at least in SYdney....

    but the PQ is amazing..... the SQ was much better on Sunday night.... Tuesday it wasn't that great..... it could have been the contestants.... who knows....

  6. I would like to see what video attributes the new Denon pre/pro has before deciding on the future of my VP50. Maybe that $1000 USD upgrade price would be better spent on the pre/pro upgrade. Then I will get the new HD sound format decoding, HDMI 1.3 and hopefully some handy video processing as well.

    that's a very good point beejay .... and the way everything is going... soon enough you will have all/most soures 1080i/p with a 1080p panel..... the need for external VP in most situations will be greatly reduced..... smart move for them that ABT is focusing on chips.... but bad for us existing VP onwers....

  7. Yes, if same applies as per the VP30>50 upgrade, you'll get a local warranty. For that, DVDO pay Synergy a nominal fee per unit. In any event, I'm going to sit this upgrade out and wait for the next offering.

    the only thing I really wanted was noise reduction for some sd sources (namely foxtel and the odd old DVD...) - too much money just for this... so I'm going to upgrade my amp, to a new Onkyo 905, which has the HQV chip and some settings for noise & block removal (ie: low, med, high) .... at least I'll get a new amp out of the upgrade, with similar or less difference in money then if I upgraded my VP50 .....

    my current VP50 will be the last piece of equipment I buy from DVDO .... really not happy about their ongoing support..... I doubt also that after this one, I'd ever buy another dedicated external scaler....the new amps are doing such a great job and with HD sources, the need is really reduced for top external scalers.....

  8. From www.toppytools.com

    E02 - Corrupted firmware in flash memory.

    A simple reflash of any FW should fix things.

    Regards

    Peter Gillespie

    thanks peter ... i have purchased toppy tools... I should have used it.... I just wasn't sure of what to do! I'll check if the toppy rep has picked up the masterpiece by Tuesday or not.... I may be able to pick it up and try the fw update.....

    many thanks, I'll try that.....

    Cheers,

    Marcelo

  9. Bitey Bags Bargain of the Year IMO

    mate, you should feel sorry for bitey ..... when I was preparing the toppy to post it this morning, and making it more simple to use with less taps, etc.. (since it was for his father in law) - the toppy stopped working... it started giving me an error (e - 02).. no idea what happened.... tried to work it out for 2 hours... it worked sometimes and sometimes it didn't... it never happened before.... murphy's law .... so I had to call Mr. Bitey, apologise profusely, refund the money via paypal + paypal fee (so he is not out of pocket), take the toppy to my local retailer to get fixed.... at least it happened before I posted it...

    I'm extremely sorry for the inconvenience I cause Mr. Bitey ... and everyone who didn't get in should count themselves lucky on this one.... let's see how topfield australia gets back to me... is still under warranty .... so...

    again, sorry Mr. Bitey ...

    Cheers,

    Marcelo

  10. Thanks for the reply. I'm not sure what you mean by switching gear? Also I've read posts on this forum that it doesn't matter if you have the PS3 set to Bitstream or PCM as you will still get the Lossless track when you select it throught the menu on the disc. If your referring to my sound drop out when playing the Heavenly sword demo, I have tried both settinga and still get the audio drop out during the cut scenes namley the music and sound effects the dialogue is still there. Never had a problem with the Arcam AV8 hooked up with optical.

    reading the AV forums in the US, there are issues with the PS3 and the 805, 875 & 905 ........ HDMI is still not 100% reliable at times, and the fault may or may not lie entirely with Onkyo ....

    wheat I meant by swtiching was the order in which the equipment is turned on ... for example in my case, I need to turn my scaler before I turn on all other equipment, otherwise sometimes I get synch issues with HDMI .....

×
×
  • Create New...
To Top