Jump to content

Roland P.

Members
  • Content Count

    27
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

16 Neutral

About Roland P.

Profile Fields

  • Location
    Melbourne
  • Country
    Australia

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yes, you can, you just need a cable with male to male 3.5mm plugs and it should work well. I am using the same solution in my setup.
  2. Item: Van den Hul CS 122 Hybrid (Halogen Free) Speaker Cable 2 x 4.1 m Unterminated Location: Newport, 3015 Price: $150 Item Condition: Excellent Reason for selling: No longer required Payment Method: Cash upon pick up Extra Info: Had to purchase longer cables so these are no longer required in my setup. Purchased the same brand / model again. The 2 conductors are made of 147 strands of 0.16 mm. diameter high purity Matched Crystal OFC with a very dense pure silver coating. Each conductor exhibits a cross-section area of 2.96 mm², equalling AWG 12.5. Covering the two conductors you find an extra Linear Structured Carbon saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again. The resistance per lead is: 0.58 Ohm/100 meter. The capacitance between the 2 leads is: 32 pF/meter. The cable jacket is made of HULLIFLEX 3, a very flexible and mechanically superb insulation material. The insulation of the plus and minus leads is different in shape with printing in the flat middle section. Both properties are easy polarity finders. Type printing on every 25 cm. (10″) makes cutting of specified lengths very easy. Photos:
  3. Item: Rotel RMB-1585 5 channel power amplifier Location: Melbourne Price: $1,700 Item Condition: Mint Reason for selling: Reducing number of channels in my system Payment Method: Cash, PayPal (buyer covers fees), Bank Transfer, PayID Extra Info: The RMB-1585 is Rotel’s flagship home theatre amplifier. It provides both the massive power and sonic sophistication required by the finest home theatre systems. With five channels, each capable of producing 200 continuous Watts each into 8 ohm loads (a full kilowatt of output power) the RMB-1585 masters any A/V system regardless of speaker load or room size. I am the first owner, purchased it from a Rotel authorised dealer in Melbourne. Comes with manual and original invoice. No box, hence local pick up is preferred. Unit is in an immaculate condition. Audition can be organised in Newport, 3015. Specs: DIMENSIONS (W × H × D): 431 × 237 × 454mm FRONT PANEL HEIGHT: 5U / 221mm POWER CONSUMPTION: 1100W STANDBY POWER CONSUMPTION: 0.5W NET WEIGHT: 36kg (79lbs.) BTU RATING (4Ω, 1/8th power): 2372 BTU/h. CONTINUOUS POWER OUTPUT: 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD) (20Hz–20kHz): <0.03% FREQUENCY RESPONSE: 10Hz - 100kHz +0.5, -3dB S/N RATIO (IHF "A" Weighted): 116dB GAIN: 26.5dB Photos:
  4. Item: Rotel RMB-1555 5 channel power amplifier Location: Melbourne Price: $1,000 Item Condition: Mint Reason for selling: Reducing number of channels in my system Payment Method: Cash, PayPal (buyer covers fees), Bank Transfer, PayID Extra Info: The RMB-1555 is a remarkable multichannel amplifier with power output conservatively rated at 120 Watts per channel into 8 ohms (all channels driven). I am the first owner, purchased it from a Rotel authorised dealer in Melbourne. Comes with manual and original invoice. No box, hence local pick up is preferred. Unit is in an immaculate condition. Audition can be organised in Newport, 3015. Specs: DIMENSIONS (W × H × D): 431 × 188 × 454mm FRONT PANEL HEIGHT: 4U / 176.8mm POWER CONSUMPTION: 650W STANDBY POWER CONSUMPTION: 0.5W NET WEIGHT: 21.8kg (48lbs.) BTU RATING (4Ω, 1/8th power) 1683 BTU/h. CONTINUOUS POWER OUTPUT: 120W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD) (20Hz–20kHz): <0.03% FREQUENCY RESPONSE: 10Hz - 100kHz +0.5, -3dB S/N RATIO (IHF "A" Weighted): 116dB GAIN: 26.5dB Photos:
  5. Item: Lenehan MLT3 floorstanding loudspeakers - titanium grey colour Location: Melbourne (3015) Price: $2,900 Item Condition: Very good Reason for selling: Too many speakers, need space Payment Method: Pickup - cash or bank transfer Extra Info: Purchased these speakers from @krebetman at the end of October 2019. Since then I have purchased another pair of floorstanders (way too many good deals popping up on SNA!) and now I am running out of space. @krebetman provided excellent photos and additional information in his ad, see link below. This pair has been priced to sell quickly (FYI - as at 1 November 2019 there is another pair of titanium grey MLT3s available for sale in WA, however, the asking price for those is $4,100). Audition can be organised upon request. Photos:
  6. Hi Mat, my PMs are not going through to you, would you mind sending me a PM? Cheers.
  7. Item: Parasound Halo Integrated (HINT) Amplifier Location: Newport, VIC Price: $2,500 Item Condition: Excellent, no marks or scratches at all Reason For Selling: Funding HT upgrade Payment Method: Pickup - cash Extra Info: Great integrated amp, superb sound quality, plenty of power and all the features you could ever need. Purchased it from a fellow SNA member about a year ago. Comes with the original box and all accessories. Audition can be organised in Newport, VIC. Note this is not the latest version (which has a little digital display next to the volume control knob).
  8. Welcome Zoli, hope you will find the forum useful. Cheers from Melbourne - a fellow Hungarian.
×
×
  • Create New...