Nick73

Item: Electrocompaniet EC 4.7 Preamp Location: Sydney Price: $1,100 Item Condition: Excellent Reason for selling: Bought for second setup but can't justify cost of completing system Payment Method: Pickup - Cash Extra Info: Bought on Stereonet a couple years ago and have never really used it because I never finished getting all the components for a secondary setup. Tested in my main setup and sounded great. I am out of town and don't have fresh photos of this unit so I have posted photos from the original ads I purchased these from so they are of the actual item. The amp is essentially in same condition as when I originally purchased as have never really used it but would be happy to post current photos when I get the chance. Have dropped price for quick sale. The original post I purchased from can be found here. Photos: Advertisements without photos of the actual item will not be approved.

Item: Sonus Faber Cremona Bookshelf Maple original Auditors (not M version) Location: Sydney Price: $2,500 Item Condition: Excellent Reason for selling: Bought for second setup but can't justify cost of completing system Payment Method: Pickup - Cash Extra Info: Bought these on Stereonet a couple years ago and have never really used them because I never finished getting all the components for a secondary setup. Tested them in my main setup and they sounded wonderful. In excellent condition all round. They are a beautiful looking and sounding unit. I have included the link below to the original Stereonet ad I bought these from. Have dropped price for quick sale. Photos: Advertisements without photos of the actual item will not be approved.

Item: KEF Reference Series Model 105.2 with spare B110 midrange drivers (matched pair) Location: Sydney Price: $2,300 Item Condition: Drivers, Excellent. Mid and tweeter housing, Excellent. Wooden cabinets, Some blemishes but generally good Reason for selling: Downsizing Payment Method: Pickup - Cash Extra Info: Beautiful example of top end British 70s laid back HIFI sound. I have had some wonderful moments with these speakers. Need a lot of juice to get those massive bass units under control. Had it paired with McIntosh MC7300 which I have also listed for sale. Found a pair of brand new old stock mid drivers which I had installed (drivers alone cost me $400). Will include original matched pair of mid drivers. To my ears I couldn't tell the difference when I installed the new mids. Bass drivers were rebuilt by previous owner just before I bought them. Ordered a crossover kit upgrade but to my surprise found that the crossovers had already been upgraded so will include all the new caps from crossover kit. These speakers sit on removable casters which are in perfect working order but I would recommend removing the casters and placing on low stand. I have also used sorbathane half spheres instead of casters on floating floorboards with great results. Also have a thin layer of sorbathane between the Mid and tweeter housing and bass cabinets which I will include which I feel help give more clarity. One mid dustcover is missing. Have enough original spare dustcover cloth to redo bass covers if you ever feel the need. Specification: Model 105.2 System type: Three-way, floor standing Enclosure type: Closed box Size: 965 x 415 x 455 mm (38 x 16.3 x 17.9 inches) Weight: 36kg (80 lb) Input Impedance: 8 ohms Rated maximum power: 200W programme Amplifier Requirements: 40-200 watts per channel into 8 ohms Frequency response: 38-22,000Hz +/-2dB at 2m on measuring axis Sensitivity: 86dB at 1m for 1W, anechoic conditions Crossover Frequencies: 400, 2500Hz Maximum output: 107dB on programme peaks under typical listening conditions Finishes: Walnut, teak, rosewood and black ash veneers Grille: Black or brown cloth System: SP1118 (up to SN2965) Drive units: B300 bass unit (SP1071), B110 midrange unit (SP1057), T52 tweeter (SP1049) Crossover: SP1119, SP1131, SP1134 and SP1135 System: SP1118 (from SN 2966 to SN4490) Drive units: B300 bass unit (SP1071), B110 midrange unit (SP1057), T52 tweeter (SP1072) Crossover: SP1119, SP1131, SP1134 and SP1135 System: SP1118 (from SN4491) Drive units: B300 bass unit (SP1071), B110 midrange unit (SP1057), T52 tweeter (SP1072) Crossover: SP1119 and SP2012 Photos: Advertisements without photos of the actual item will not be approved.

Item: McIntosh MC7300 Location: Sydney Price: $4,900 Item Condition: Excellent Reason for selling: Downsizing Payment Method: Pickup - Cash Extra Info: This amp has served me well for some years and I'll be sad to see it go . Probably the most reliable amp I've ever owned. The only thing that has ever failed on it are the light bulbs behind the faceplate (which is a thing on these older Macs) which does not affect operation in any way. It has never skipped a beat. I had the lightbulbs changed recently so also had it serviced while it was in. I have included a pic of all the caps that were replaced. Also still have 12 new bulbs for when the time comes. Cosmetically is in very good condition with a few minor blemishes and functionally sounds as good as the day I got it. Also have original manual in excellent condition. You can drive almost any speaker with this amp. This amp has been well looked after and is guaranteed to put smiles on faces for years to come Form Stereo power amplifier Output Stereo: 300W+300W (a sinusoidal consecutive output, load-impedance 2/4/8ohm) Mono-bridge: 600W (a sinusoidal consecutive output, load-impedance 4/8/16ohm) Mono-parallel: 600W (a sinusoidal consecutive output, load-impedance 1/2/4ohm) Output load impedance Stereo: 2 ohm, 4ohm, 8ohm Mono-bridge: 4/8/16ohm Mono-parallel: 1/2/4ohm Output frequency band 20Hz - 20kHz THD Stereo: 0.005% or less (at the time of 20Hz - 20kHz, 250mW-300W, and both channel drive) Monophonic recording: 0.005% or less (at the time of 20Hz - 20kHz, 250mW-600W, and both channel drive) Cross modulation distortion (at the time of 20Hz - 20kHz, and both channel drive) Stereo: 0.005% or less (a one side channel and less than peek 300W) Monophonic recording: 0.005% or less (it is attached to a one side channel and is less than peek 600W) Frequency band (at the time of 1W output) 20Hz - 20kHz, and +0 -0.25 dB 10Hz - 100kHz, and +0 -3.0 dB SN ratio 105dB or less (at the time of an Output power A Wei Ted) Dynamic head room 1.9dB(IHF) Dumping factor 40 or more Input impedance 20kohms (unbalance) 40kohms (equilibrium) Input sensitivity 2.5V and 1.4V switching Power guarding It is less than THD2% to over-drive 14dB at 1kHz. Power source AC100V, 50Hz/60 Hz, 0.6A-13A Dimensions Width 443x height 196x depth of 420mm (termination included) Weight 35kg Photos: Advertisements without photos of the actual item will not be approved.

Item 1: Sonus Faber Cremona Bookshelf Maple original Auditors (not M version) Item 2: Electrocompaniet EC 4.7 Preamp Location: Sydney Price Sonus Faber: $2,700 Price EC4.7: $1,100 Item Condition: Both Items in excellent condition Reason for selling: Bought both items in these classifieds here last August. I had a thought to build a bookshelf system to use at my Dad's place when I travel to Sydney once a month but I just can't justify the cost of buying more components to complete the setup for something I will hardly use. Payment Method: Pickup - Cash, Paypal +5%, COD Only Extra Info: I have only used both items once to check that they where in working order and all good. They look great too! They have been boxed up ever since I bought them last August so are in the exact same condition as I received them. Original outer box for EC 4.7. I drive between Melbourne and Sydney semi regularly so may be a able to deliver depending on location. I am out of town so I have posted photos from the original ads I purchased these from so they are of the actual items. The original posts I purchased from can be found here Sonus Faber Cremona Bookshelf Maple Electrocompaniet EC 4.7 Preamp Pictures:

Why where the dust caps replaced? Can you please explain about screw and cage?? Thanks

Are these original Cremora Auditor or newer Auditor M?

Looks great. PM offer sent.

I'll grab 1 of the 100v R core with DC plug + shipping to Sydney. PM me with payment details. Cheers

It is just a standard barrel connector. Outer dimension 5mm Inner dimension 2.5mm. Centre pin is positive.

Is this still available?

I'm looking for a linear supply for my Chord 2qute DAC. I think it is 12v 1amp. Will one of he Teradaks you have do the job?

I'll grab the other pair if still available. Cheers

Hi all. I am in the market for a new Pre and thought I might check out the classifieds section of this site Happy Listening