Jump to content

campo007

Members
  • Content Count

    355
  • Joined

  • Last visited

Everything posted by campo007

  1. Further information: Buyer incurs the cost of shipping The D-linear15 is the first power conditioner made by Consonance. The main feature of the D-linear15 is that it is designed to deal with various types of audio equipment matching each piece with its own power supply requirement. The D-linear15 supplies 3 groups, which totals 10 output ports, including the digital power supply, the analogue power supply and the power output power supply. These plugs will accept any plug from anywhere in the World. The digital power supply ports are for audio source equipment (such as CD, DVD, DAC and digital stream players). The analogue power supply ports are for pre-amplifiers and phono stages. Digital source and analogue pre-amplifiers are not sensitive to internal resistance from the power grid, but do need more pure electricity supply. But pre-amplifiers and phono stages, with their high level gain, are very sensitive to dirty power which can increase the noise by 100 fold. Therefore digital and analogue equipment should be plugged into the separate independent ports to avoid crossover noise. Digital and pre-amplifier outputs travel trough a high quality transformer with 3 levels of shielding (type R) which is isolated with silicon-gel.The silicon-gel will lower the high frequency noise and supply suitable damping. Digital and analogue power output will, in turn, be isolated. Normally the power supply for power and integrated amps, come from a high-power transformer. High-power transformers have very low internal impedance are very sensitive to DC offset. DC offset can cause transformers to hum, run hotter and have lower voltage output or even burn up their transformers. The D-linear15 power outputs works in parallel mode with the AC power supply and, as an active system, compensates any DC offset in the AC mains from the wall socket. Our special circuit design does not limit the power to the audio system in any way and hence, allows very powerful amps, including several large amps to be hooked up to the D-linear15. The Security Protection: - Overcurrent Protection: The D-linear15 will shut down the power supply to protect the equipment if the equipment receives too much current. - Overvoltage Protection: The D-linear15 will shut down the power supply to protect the equipment if there is a sudden dangerous level of voltage. - Surge Protection: The D-linear15 will protect the equipment if there is a surge in the power grid. - Lightning protection Upgrade in power: - Common-mode Interference Rejection, restrain the same phase high frequency interference from live line, Null line to Earth line. - Differential-mode Interference Rejection, restrain the high frequency interference from live line to Earth line. - Phase Correction, restrain the DC between positive line and the negative line. AC power connection: 240V Over current protection: 25A Over voltage protection: 20% p-p Surge Protection: 430V p-p DC suppression: 2400mV Source and pre-amplifier power output: 600W Power and integrated amplifier power output: 3400W Size: 42 X 38 x 13cm Photos: Advertisements without photos of the actual item will not be approved.
  2. Further information: ORIGINALLY LISTED FOR $4500, NOW $4250 OR BEST OFFER. NO TRADES. ******FREE SHIPPING IN AUSTRALIA****** Current factory assembled AUD$9,500 I bought this two years ago and was assembled in the USA by Digital Pete. L5 Mentor is ANK's highest level pre-amplifier with triple C-Core output transformer technology, shunt regulated power supply, either V-Cap Capacitors and Mundorf Evo on output board, Large Mains Transformer, 2 x Dual 4 Pole Chokes, Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply, Dual KHOZMO attenuators, ELMA Selector, Audio Note Tantalum resistors and Audio Note Silver RCA jacks. I'm selling the unit with the tubes - NOS RCA 5U4 Rectifiers x 2, NOS Tung Sol VT-231 Black, and JJ ECC99 Based on ANK's proprietary power supply design technology which incorporates Dual 5U4G Rectifiers, Dual 4 pole Chokes and Large Mains Transformer more commonly found In power amplifiers. The SHUNT regulated design delivers instantaneous current to the driver stage in response to the ever changing demands of the audio signal. The Mentor uses 2 x Triple C-Core output transformers for maximum signal energy transfer and the ability to handle long interconnection runs. The result is outrageous dynamics, subtleties and sensitivity delivered to the power amplifier. The Driver stage employs a 6SN7 input stage followed by an ECC99 to drive the C-Core output transformers. Employing Audio Note 1W tantalum resistors, ELNA Silmic Electrolytics and V-Cap coupling capacitors, the parts are top notch. An ELMA selector and extension kit are used to allow very short wire runs from the input RCAs to the output board. The filament section has a separate board with individual heaters for each line stage tube. The Level 5 power supply is the magic behind the Mentor. It’s ANK's highest level power supply specification with over specified Mains, Dual 4 pole chokes & 2 x 5U4G Tube Rectification, 35mm Mundorf Mlytic Power Supply Capacitors and SHUNT regulation. SHUNT regulation provides an additional reservoir of current (30ma) to be running from B+ at all times separate from the standard current draw of the line stage. Thus when music makes quick changes and demands instantaneous current addition, this additional current will come from the SHUNT resistor mounted on the chassis. The L5 pre-amplifier with two KHOZMO 48 step attenuators that ensures there is absolutely minimal losses in the signal path and has a long life in excess of 50,000 cycles. SHUNT type: Only two resistors in signal path Switching type: MBB (Make Before Break) Attenuation range: -60 dB - 0 dB Attenuation per step: steps 1 to 11 - 2dB, 12 to 48 - 1dB Contact material: Hard gold • Polished wiper and contact pins Extremely short signal path • Channel matching: +/-0.1 dB Resistors: Vishay/Dale RN55 1% 100ppm , 1/8W, low noise, non-inductive, metal film • Precision ball bearing support Specifications: Output Tubes: 1 x 6SN7 Electro Harmonix & 1 x ECC99 JJ Rectifier Tubes: 2 x 5U4GB Outputs: 1 x Stereo Pair RCA or Balanced O/P via XLR connectors to a Power Amplifier Inputs: 4 x Stereo Pair RCA PCBs: Sturdy PCBs with 2oz copper trace and thick grounding/ HT traces Chassis: 3mm Aluminum with Black Powder Sandtex Width: 43 cm Height (inc feet): 20.3 cm Depth: 44.5 cm Weight: 17.6 Kilos Parts Compliment includes: Large Mains Transformers 2 x Dual 4 Pole Chokes Triple C-Core Output Transformers Audio Note 1W Tantalum Resistors V-CAPs Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply Dual KHOZMO attenuators ELMA Selector Audio Note Silver RCA jacks *****FREE SHIPPING IN AUSTRALIA***** Photos: Advertisements without photos of the actual item will not be approved.
  3. Sorry, not up for trades. But i will consider a serious cash offer.
  4. Further information: Current factory assembled and shipping price AUD$9,500 I bought this two years ago and was assembled in the USA by Digital Pete. L5 Mentor is ANK's highest level pre-amplifier with triple C-Core output transformer technology, shunt regulated power supply, either V-Cap Capacitors and Mundorf Evo on output board, Large Mains Transformer, 2 x Dual 4 Pole Chokes, Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply, Dual KHOZMO attenuators, ELMA Selector, Audio Note Tantalum resistors and Audio Note Silver RCA jacks. I'm selling the unit with the tubes - NOS RCA 5U4 Rectifiers x 2, NOS Tung Sol VT-231 Black, and JJ ECC99 Based on ANK's proprietary power supply design technology which incorporates Dual 5U4G Rectifiers, Dual 4 pole Chokes and Large Mains Transformer more commonly found In power amplifiers. The SHUNT regulated design delivers instantaneous current to the driver stage in response to the ever changing demands of the audio signal. The Mentor uses 2 x Triple C-Core output transformers for maximum signal energy transfer and the ability to handle long interconnection runs. The result is outrageous dynamics, subtleties and sensitivity delivered to the power amplifier. The Driver stage employs a 6SN7 input stage followed by an ECC99 to drive the C-Core output transformers. Employing Audio Note 1W tantalum resistors, ELNA Silmic Electrolytics and V-Cap coupling capacitors, the parts are top notch. An ELMA selector and extension kit are used to allow very short wire runs from the input RCAs to the output board. The filament section has a separate board with individual heaters for each line stage tube. The Level 5 power supply is the magic behind the Mentor. It’s ANK's highest level power supply specification with over specified Mains, Dual 4 pole chokes & 2 x 5U4G Tube Rectification, 35mm Mundorf Mlytic Power Supply Capacitors and SHUNT regulation. SHUNT regulation provides an additional reservoir of current (30ma) to be running from B+ at all times separate from the standard current draw of the line stage. Thus when music makes quick changes and demands instantaneous current addition, this additional current will come from the SHUNT resistor mounted on the chassis. The L5 pre-amplifier with two KHOZMO 48 step attenuators that ensures there is absolutely minimal losses in the signal path and has a long life in excess of 50,000 cycles. SHUNT type: Only two resistors in signal path Switching type: MBB (Make Before Break) Attenuation range: -60 dB - 0 dB Attenuation per step: steps 1 to 11 - 2dB, 12 to 48 - 1dB Contact material: Hard gold • Polished wiper and contact pins Extremely short signal path • Channel matching: +/-0.1 dB Resistors: Vishay/Dale RN55 1% 100ppm , 1/8W, low noise, non-inductive, metal film • Precision ball bearing support Specifications: Output Tubes: 1 x 6SN7 Electro Harmonix & 1 x ECC99 JJ Rectifier Tubes: 2 x 5U4GB Outputs: 1 x Stereo Pair RCA or Balanced O/P via XLR connectors to a Power Amplifier Inputs: 4 x Stereo Pair RCA PCBs: Sturdy PCBs with 2oz copper trace and thick grounding/ HT traces Chassis: 3mm Aluminum with Black Powder Sandtex Width: 43 cm Height (inc feet): 20.3 cm Depth: 44.5 cm Weight: 17.6 Kilos Parts Compliment includes: Large Mains Transformer 2 x Dual 4 Pole Chokes Triple C-Core Output Transformers Audio Note 1W Tantalum Resistors V-CAPs Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply Dual KHOZMO attenuators ELMA Selector Audio Note Silver RCA jacks Photos: Advertisements without photos of the actual item will not be approved.
  5. Item: Audio Note Kits L5 DAC 5.1 R-2R Location: Melbourne 3046 Price: $4,500 Item Condition: Very Good +++ Reason for selling: No Longer Required Payment Method: Pickup - Cash, Paypal, COD Only. PICK UP ONLY AS I DON'T HAVE ORIGINAL PACKAGING. Extra Info: Current assembled and shipped price AUD$9,500 Selling the unit with the following tubes - NOS RCA 5U4 Rectifier, NOS Amperex 12AU7, JJ ECC99 ANK DAC 5.1 Signature features including: New digital board (SHUNT). New super regulation board. New large can I/V transformers. New 12AU7 & ECC99 line stage. Triple C-Core O/P Transformer. New WE274B SHUNT power supply. Dual mains transformers. Mentor filament board. Silver input cable. ANK was out to build on their current DAC expertise and develop one of the finest digital to analog converters on the market today. They leveraged the Mentor shunt power supply technology and combined that with a film capacitor architecture dedicated to delivering unparalleled performance. The dynamics, the smoothness, the end result - a staggering experience for the modern audiophile and a chance to re-experience their entire digital collection. The DAC 5.1 signature architecture: At the heart of the digital to analog section there are four key ingredients: 1. All new digital DAC board with on-board SHUNT regulation. 2. All new super regulator board that feeds ultra quiet DC voltages to the digital board. 3. Large can I/V transformers that transfer the delicate analog signal coming from the DAC board over to the line board. 4. Analog output stage encorporating a 12AU7 & ECC99 high gain, zero feedback configuration driving triple C-Core output transformers. Dedicated WE274B SHUNT power supply: The DAC 5.1 signature has two separate mains transformers; one dedicated strictly to the HT voltages that power the line stage, the other supplies our new super regulation board and the line stage DC filaments. At the heart of the power supply is the RCA 5U4 rectifier tube. The overall design of the power supply incorporates three substantial chokes supplying two separate HT voltages, one for the 12AU7 input stage, and one for the ECC99 output stage. Thus each tube on the output stage has its own dedicated HT path. The SHUNT design in this unregulated power supply enables the ultimate dynamics and detail, instantaneous current supplies are available to the ever changing analog signal running through the system. The results are staggering dynamics that most audiophiles will have never experienced. I/V transformers: Current to voltage transformers are key to the Audio Note Dac philosophy. The large can mumetal I/V transformers facilitate the ultimate in signal transfer between the digital and analog domains. This preserves the small analog signal at birth and presents it to the line stage 100% intact. It is one of the most critical components (and little understood) of the Audio Note DAC design philosophy. Triple C-Core output transformers The triple C-Core transformers at the output ensure the highest quality transfer of the analog signal. The C-Cores bring a level of detail and authority across the entire spectrum and increase definition, authority and high frequency detail, bringing an incredible accuracy and realism to the music. They also have very low output impedance and can run long interconnects. Both of these aspects ensure excellent system matching. All the Audio Note DACs use the AD1865 chip and support RedBook 16/44Khz plus 24/96Khz files. 192Khz files will pass through the DAC and use 96Khz processing. ANK have found that when utilizing a high quality resistor ladder DAC on RedBook and 24/96 the result is superior to higher resolution files processed by Delta-Sigma designs. In a resistor ladder architecture precision laser trimmed resistors are used for each digital bit in order to create the analog voltage from a passive circuit. Photos: Advertisements without photos of the actual item will not be approved.
  6. Item: Audio Note Kits L5 Mentor Preamp Location: Melbourne 3046 Price: $4,500 Item Condition: Very Good +++ Reason for selling: No Longer Required Payment Method: Pickup - Cash, Paypal, COD Only - PICK UP ONLY AS I NOT NOT HAVE ORIGINAL PACKAGING. Extra Info: Current factory assembled and shipping price AUD$9,500 I bought this two years ago and was assembled in the USA by Digital Pete. L5 Mentor is ANK's highest level pre-amplifier with triple C-Core output transformer technology, shunt regulated power supply, either V-Cap Capacitors and Mundorf Evo on output board, Large Mains Transformer, 2 x Dual 4 Pole Chokes, Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply, Dual KHOZMO attenuators, ELMA Selector, Audio Note Tantalum resistors and Audio Note Silver RCA jacks. I'm selling the unit with the tubes - NOS RCA 5U4 Rectifiers x 2, NOS Tung Sol VT-231 Black, and JJ ECC99 Based on ANK's proprietary power supply design technology which incorporates Dual 5U4G Rectifiers, Dual 4 pole Chokes and Large Mains Transformer more commonly found In power amplifiers. The SHUNT regulated design delivers instantaneous current to the driver stage in response to the ever changing demands of the audio signal. The Mentor uses 2 x Triple C-Core output transformers for maximum signal energy transfer and the ability to handle long interconnection runs. The result is outrageous dynamics, subtleties and sensitivity delivered to the power amplifier. The Driver stage employs a 6SN7 input stage followed by an ECC99 to drive the C-Core output transformers. Employing Audio Note 1W tantalum resistors, ELNA Silmic Electrolytics and V-Cap coupling capacitors, the parts are top notch. An ELMA selector and extension kit are used to allow very short wire runs from the input RCAs to the output board. The filament section has a separate board with individual heaters for each line stage tube. The Level 5 power supply is the magic behind the Mentor. It’s ANK's highest level power supply specification with over specified Mains, Dual 4 pole chokes & 2 x 5U4G Tube Rectification, 35mm Mundorf Mlytic Power Supply Capacitors and SHUNT regulation. SHUNT regulation provides an additional reservoir of current (30ma) to be running from B+ at all times separate from the standard current draw of the line stage. Thus when music makes quick changes and demands instantaneous current addition, this additional current will come from the SHUNT resistor mounted on the chassis. The L5 pre-amplifier with two KHOZMO 48 step attenuators that ensures there is absolutely minimal losses in the signal path and has a long life in excess of 50,000 cycles. SHUNT type: Only two resistors in signal path Switching type: MBB (Make Before Break) Attenuation range: -60 dB - 0 dB Attenuation per step: steps 1 to 11 - 2dB, 12 to 48 - 1dB Contact material: Hard gold • Polished wiper and contact pins Extremely short signal path • Channel matching: +/-0.1 dB Resistors: Vishay/Dale RN55 1% 100ppm , 1/8W, low noise, non-inductive, metal film • Precision ball bearing support Specifications: Output Tubes: 1 x 6SN7 Electro Harmonix & 1 x ECC99 JJ Rectifier Tubes: 2 x 5U4GB Outputs: 1 x Stereo Pair RCA or Balanced O/P via XLR connectors to a Power Amplifier Inputs: 4 x Stereo Pair RCA PCBs: Sturdy PCBs with 2oz copper trace and thick grounding/ HT traces Chassis: 3mm Aluminum with Black Powder Sandtex Width: 43 cm Height (inc feet): 20.3 cm Depth: 44.5 cm Weight: 17.6 Kilos Parts Compliment includes: Large Mains Transformer 2 x Dual 4 Pole Chokes Triple C-Core Output Transformers Audio Note 1W Tantalum Resistors V-CAPs Elna Silmic Electrolytics & Mundorf 35mm Mlytics in Power supply Dual KHOZMO attenuators ELMA Selector Audio Note Silver RCA jacks Photos: Advertisements without photos of the actual item will not be approved.
  7. Item: OSBORN DATALINK SPEAKER CABLE 2.5m PAIR Location: Oak Park, VIC 3046 Price: $150 FREE postage included. Item Condition: Used - Very Good Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, Bank Deposit. Extra Info: 4 Banana plugs at speaker end and 2 spades at amp end per cable. Photos: Advertisements without photos of the actual item will not be approved.
  8. I’m not sure if I could bi-amp. It’s an amazing price though.
  9. Item: Timestep Technics SL-1200, SL1210 New Precision Bearing Location: OAK PARK, VIC 3046 Price: $400 Item Condition: NEW - UNOPENED Still in box. Reason for selling: NEW DIRECTION Payment Method: Pickup - Cash, Paypal, Bank Deposit Extra Info: Will ship Australia wide at buyers expense. This is a brand new unused Timestep bearing for the Technics SL-1200 & SL1210. I just received it from Dave at Timestep month ago, but decided to go in a new direction while in transit. Technics SL-1200 SL-1210 New Precision Audiophile Bearing The standard bearing cannot keep the oil in place. Instead a high viscosity "anti-fling" oil must be used. "Other" bearings can only be "topped up" and the oil not actually replaced. Imagine not being able to change the oil in your car, only adding a bit now and again Why would you want to change the oil ? Well we found a fairly heavy oil works best with the Funk Platter and thinner oil for very heavy platters. But you have the choice, you can take our advice, or change the oil to whatever, whenever ! BTW, unlike others, our bearing fits the Funk platter perfectly, as it should ! The Timestep bearing has the spindle as a solid single piece of polished 303 Stainless Steel with a much larger base diameter and the bearing is polished PB102 Phosphor Bronze. A silicon nitride ball and PTFE thrust pad are fitted. The whole assembly is in a captive oil bath so that you can use more suitable thin oil, or any oil of your choice. One image shows the Timestep bearing shaft on the left and the Technics on the right. The Technics bearing shaft has a cut out just below the brass part, resulting in a diameter of just 5.9 mm, the Timestep bearing shaft at this point is 10.4mm. This gives the Technics a critical bending moment around the reduced diameter. The main part of the Technics shaft bearing surface is 7.1mm diameter and the Timestep one is 11.1mm which results in a bearing surface increase of nearly 2.5 times more (actually 2.445). And that's a lot! The other image is looking down into the captive shaft bearing. At the bottom would normally be the P.T.F.E. thrust pad and the silicon nitride ball bearing, and a lot of very nice oil. So with 1.76 times diameter at the weakest point and 2.5 times more bearing surface area, you can see why we get such great performance. We deliberately use the existing Technics bearing housing because it fits properly and being cast has great strength and rigidity, also it does not ring like a brass bell. You don't need any special tools, you don't need to modify the PCB and you don't need to remove parts to get it to fit. A simple Philips screwdriver is all you need and less than 15 minutes of your time. This is the best selling Technics bearing, users have reported more solid bass, considerably better timing, greater soundstage and a general "feel good" sensation. Photos: Advertisements without photos of the actual item will not be approved.
  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
×
×
  • Create New...