Jump to content

couchy

Member
  • Posts

    547
  • Joined

  • Last visited

Everything posted by couchy

  1. Further Information: 8 channel amp, Superb sound, oozes quality, Looks new except for the nick on the face(that's how it came to me). Moved to a 12 channel amp. General Power output 110W x 8Ch @ 4 Ohm 55W x 8Ch @ 8 Ohm Peak power output 150W x 8Ch @ 4 Ohm 80W x 8Ch @ 8 Ohm Input impedance 25k Ohm Output impedance 2.2K ohm Gain 23 dB Frequency response 10Hz - 50kHz Sensitivity 0.89 V to rated power Signal to noise ratio > 91 dB Total harmonic distortion 0.01% Power supply 100-240v Power consumption 1.6 Watts Output voltage 0dB, 1kHz: RCA 4.0Vrms Nominal input level 1.38V Connections input 8 x RCA Connections output 8 x Four-way binding posts Connections control RS232 Weight and dimensions Weight 6.5kg Dimensions (W x H x D) (mm) 432 x 80 x 341
  2. Further Information: Luxman CL-350 240 volt ss preamp. In great condition and sounding great. Case in nice condition with a few knicks. This sounded as good as my Luxman cl-35 tube pre when compared a few years ago. Great for two turntables.
  3. Further Information: Ming Da mc3008-ab . Amazing sound from this amp. Uses 805a valves and 2a3 valves for fantastic sound, Great bass too. About 30 to 40 watts and is built very well. Very heavy at over 30 kg s. I found the shipping box so I can post.
  4. Further Information: Great compression drivers. 16 ohm ,made in Japan
  5. Further Information: Aaron sub-120 with 2 8 inch drivers barely used. Type: 2 driver subwoofer Frequency Response: 20Hz to 150Hz Bass: 2 x 213mm cones Dimensions: 595 x 285 x 410mm Weight: 18kg Note: 100 watt power amplifier
  6. Further Information: 1.5 inch horns form Vitavox. These sounded very good. Prefer pick up but can post. Home made stands can be included if you pick up. Lots of holes in connection plate but does not affect their performance.
  7. Further Information: Fantastic lens I Imported in from USA. Has a few scuffs but optics are fine. Top optics in these. Can make fine adjustments with the stand. Unable to use since I changed the orientation of my Home Theatre regrettable sale. https://www.rapalloav.co.nz/product/schneider-cine-digitar-1-33x-stretch-anamorphic-lens/?v=65873cdc07df
  8. Further Information: Fantastic lens I Imported in from USA. Has a few scuffs but optics are fine. Top optics in these. Can make fine adjustments with the stand. Unable to use since I changed the orientation of my Home Theatre regrettable sale. https://www.rapalloav.co.nz/product/schneider-cine-digitar-1-33x-stretch-anamorphic-lens/?v=65873cdc07df
  9. Further Information: 1.5 inch horns form Vitavox. These sounded very good. Prefer pick up but can post. Home made stands can be included if you pick up. Lots of holes in connection plate but does not affect their performance.
  10. Further Information: Aaron sub-120 with 2 8 inch drivers barely used. Type: 2 driver subwoofer Frequency Response: 20Hz to 150Hz Bass: 2 x 213mm cones Dimensions: 595 x 285 x 410mm Weight: 18kg Note: 100 watt power amplifier
  11. Further Information: Great compression drivers. 16 ohm ,made in Japan
  12. Further Information: Ming Da mc3008-ab . Amazing sound from this amp. Uses 805a valves and 2a3 valves for fantastic sound, Great bass too. About 30 to 40 watts and is built very well. Very heavy at over 30 kg s. I found the shipping box so I can post.
  13. Hi, No I was briefly using the altec 288 with them. I think the dukanes with an adapter would get very good results. I will get back to you with the dimensions.
  14. Further Information: Luxman CL-350 240 volt ss preamp. In great condition and sounding great. Case in nice condition with a few knicks. This sounded as good as my Luxman cl-35 tube pre when compared a few years ago. Great for two turntables.
  15. Any Pics, I have the c7f and m7f and the magic mb3045 monoblocks.
×
×
  • Create New...
To Top