Jump to content

jamiebosco

Full Member
  • Content Count

    746
  • Joined

  • Last visited

Everything posted by jamiebosco

  1. Not a lot around on these, I'd contact Ed Mullen at SVS, he will surely have every piece of information for this sub Amp. Power: BASH High-efficiency 900W hybrid-class, digital-switching power amp Rated Impedance: 14 Ohms Impedance, (10 - 200 Hz) averaged for 16, 20 & 25 Hz tunings: 11.3 ± .1 to 58 +3, -4 Ohms Frequency Response (+/- 3 dB): 23 Hz (-3 dB) - 305 Hz (+ 3 dB) (25 Hz system tuning) 18 Hz (-3 dB) - 305 Hz (+ 3 dB) (20 Hz system tuning) 14 Hz (-3 dB) - 305 Hz (+ 3 dB) (16 Hz system tuning) Resonance Frequency: Variable: 16, 20 or 25 Hz Bass Principle: Bass ref
  2. Unless I am misreading the product description ,it looks like a 1/4" to XLR. Not RCA. Or are they compatible with a converter?
  3. I'm definitely not saying it's a bad subwoofer,they've really maximized what they can do in such a small sealed box --- but on Kef's website they claim a -3dB down point of 11Hz on both the KF92 (dual 9") and KC62 (dual 6.5"). A -3dB point of a subwoofer is usually (or should be ) an anechoic or 2m groundplane measurement, as room gain and boundary gain can add significantly to the bottom octaves - and as all rooms vary greatly - it makes in-room rating a bit useless/pointless (unless you're in the exact room it was taken in) yet when Newport Test Labs measured the larger KF
  4. The cabinets are lovely, but I'm drooling over the drivers used in these!
  5. This is Mark's new amp for the international market, the lower power (compared to the previous 6kw master/slave model) means it doesn't need the ground pin which helps lower the lower the chance of ground loops/hum. I have 3 of these new amps and IMHO they are a big improvement on the older 1kw amps. They have low frequency adjust, auto on, delay, 12v trigger etc
  6. These products (Jensen) are awesome! I had some sub hum in my previous config and the Sub-2RR helped eliminate it
  7. Yeah I'd rather have 2xSB-1000's than 1x SB-2000 There was one on Gumtree Brisbane for sale yesterday too!
  8. I think the 2*** series Denon's only have Audyssey XT - not XT32 (which I agree IS a necessity if looking at Denon/Marantz)
  9. Audyssey aims for a FLAT frequency response - to most people, not listening at THX Reference Level - a flat FR in the bass region will sound anemic. I would turn the subs up 3-6dB (or more) in the Channel Level section of the AVR. Are you using Dynamic EQ ? - it may also help Make sure Dynamic Volume and Audyssey LFC are both OFF
  10. Agreed with others, needing to add +16dB means something is likely up (IMHO anyway) Most auto room correction systems aim to set the subs and speakers to 75dB (ie. flat ) - unfortunately most of us listen well below THX reference level, at lower volumes our ears are much less sensitive to bass frequencies, so "flat" can sound a bit anaemic. Audyssey has "Dynamic EQ " to help solve this. If you don't have something like that, most people seem to prefer adding around 3-6dB to their subs. Adding 15dB+ is not unheard of, but it's at the extreme end - even for bassheads
  11. Wow!!!!! This would be a killer LCR setup for most people, clean and tidy - with huge output potential Agree 100% on James Loudspeakers too, I had some of their 6" bookshelf speakers and both the sound and build quality was off the charts.
  12. Further information: Literally hardly used, plugged in once and had a play with the settings, but just don't have the time anymore to tinker with my set up. Comes with the optional remote, would just need to buy the $10 plugin from miniDSP.com MiniDSP didn't send me an AU power adapter, so I bought a suitable aftermarket one over here Photos: PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in t
  13. Cheers...and so am I!! Without a word of exaggeration, the remote was probably used 5-10 times max. Was put back in its box,....got it back out last year when I updated my AVR for her to have another go at it...and it sat in its charging cradle and was never touched...so back in the box it went. The only cosmetic blemish I can see on it is the gloss black on the charging cradle has some swirl marks from cleaning the dust off it
  14. Audyssey's "after" graphs are only a "predicted response" so you have to take them with a huge grain of salt, also the resolution of the graphs is horrible. Of the graphs shown I think you have a smoother response with 1 x sub, but gain a bit more low-end output and extension with 2 x subs (probably why it sounds better) IMHO, perhaps even more important than a subs only response is a graph showing the phase response of your subs and speakers in the crossover region, something Audyssey (and most other room correction software ) often messes up - because it never measu
  15. Further information: Bought to stop Mrs whinging about all the remotes, but she never took to it Photos: ( apologies for low res images, was the only way I could get the correct orientation) PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual it
×
×
  • Create New...