Jump to content

alexb

Members
  • Content Count

    108
  • Joined

  • Last visited

Community Reputation

57 Good

2 Followers

About alexb

  • Rank
    Member

Profile Fields

  • Location
    Adelaide
  • Country
    Australia

Recent Profile Visitors

3,767 profile views
  1. Mint condition, used infrequently and battery always kept charged. Legendary performance. Comes with original box and accessories including charger, USB cable, booklet, rubber strap bands for stacking with other devices, international power adaptors. Upgraded to Mullard 6021 and Sonotube tubes (great improvement over stock tubes). At the front: 3.5mm single ended headphone output; 5 LED sample rate indicator for DSD64 (white), 88.2kHz/96kHz (blue), 176.4kHz/192kHz (green) and 44.1/48kHz (red); a volume potentiometer (also serves as on/off switch); power LED indicator; high and low gain switch and 2.5mm balanced headphone output. At the rear: 3.5mm fixed 2Vrms analog output signal (straight from DAC); power/charging connection; micro USB digital input; input switch allowing you to choose from digital or analog input sources; a 2.5mm balanced input; and a 3.5mm single ended input. Dimensions: 145mm x 25mm x 82mm / 5.75″ x 1″ x 3.25″ RMS per channel, both channels driven: Single Ended: 80mW into 32 ohms 95mW into 50 ohms 75mW into 150 ohms 60mW into 300 ohms Balanced: 125mW into 32 ohms 145mW into 50 ohms 110mW into 150 ohms 95mW into 300 ohms Input impedance SE: 10k Input impedance BAL: 50k Output impedance SE and BAL: < 1 Ohm Photos:
  2. Mint condition in original case with cables, user manual, certificate of authenticity and warranty card. Originally purchased from Addicted to Audio in Melbourne. Cables include 4-pin XLR connection and both 6.5 and 3.25mm jacks. The Audeze LCD-3 provides the highest level of audio quality, unsurpassed bass extension, exceptional treble and the best mid-range you will find in headphones. Type: Over ear, open Driver type: orthodynamic with Fazors Pads: Lambskin leather or micro-suede Foldable: No Headphone connector: 4-pin mini XLR Cable entry: dual Cable: 2.5m with 6.3mm TRS plug Driver size: 80mm diameter, active area 65mm x 50mm Max power rating: 15W (< 200ms) Max. S.P.L. > 130dB Impedance: 115 Ω (older versions are 45 Ω) Efficiency: 96dB/1mW (105dB/V) older version 84dB/1mW (97dB/V) Weight: 540 g. Clamping force: Medium Accessories: 3.5mm TRS to 6.3mm TRS converter, ruggedized travel case Photos:
  3. Hi, they were purchased in Sept 2014. Cheers, Alex
  4. Item: Bocchino Audio Mecado Titanium GR2 Isolation Feet/Footers/Cones Set Location: Adelaide Price: $SOLD Item Condition: Excellent (light marks from placement) Reason for selling: Selling last of my reference system Payment Method: Pickup, Cash, EFT, Paypal (buyer pays postage and any transaction fees) Extra Info: The last and best of my isolation footers, used under my $16k DAC (now sold so they have to go). Bocchino make some of the best engineered and best sounding cables and isolation accessories on the market. These titanium footers currently retail for over $1000 for a set of 3. Yes, they make a large difference on the spatial presentation of sound, provided you have high quality equipment. From the Bocchino website: Mecado’s...are essentially Mechanical Diodes that channel mechanical vibrational energy to the cone/shoe interface for dissipation as heat. The design minimises transmission of mechanical vibrational energy from the environment where the appliance is located and maximises the removal of the same from the appliance to the cone/shoe interface for dissipation and removal. The benefits are audible immediately on installation and improve dramatically as more Mecado’s are placed under more of the appliances; Nominally the most you need to use on most appliances is 3, on very heavy loudspeakers and behemouth amplifiers then 4 may be required. Music displays less smearing and appears more distinct. Transients are sharper and possess more bite while being more refined. Instruments have more solidity, and their focus or location in the stereo field is better defined with the space around them cleaned and free of vibrational artefacts. There is a cleaner air to music and especially vocals. A more natural reproduction of an instruments’ timbre becomes evident with greater accuracy in the mapping of each notes' transient and harmonic space. Resolution of low-level information is greatly enhanced as it would normally be lost in the micro-vibrational artefacts that persist in a system that is not properly de-coupled. There is better translation of the time between notes and greater clarity in tracking the subtle gradations of dynamic range. This enables a more accurate identification of individual instruments, and coherency of their acoustic venue. The listener is better able to garner a more marked understanding of the intent and artistry of the musicians, and the artistic message intended. Lyrics become more intelligible with sharpness of diction the most immediate improvement. Further Information: https://www.bocchtech.com/bocchinoaudio/mecado.html Price list: https://www.bocchtech.com/bocchinoaudio/monofeetprices.htm Photos:
  5. Item: Audeze LCD-3F Fazor Headphones in Case Location: Adelaide Price: $1500 Item Condition: Mint in original case Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT, Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition in original case with cables, user manual, certificate of authenticity and warranty card. Originally purchased from Addicted to Audio in Melbourne. Cables include 4-pin XLR connection and both 6.5 and 3.25mm jacks. The Audeze LCD-3 provides the highest level of audio quality, unsurpassed bass extension, exceptional treble and the best mid-range you will find in headphones. Type: Over ear, open Driver type: orthodynamic with Fazors Pads: Lambskin leather or micro-suede Foldable: No Headphone connector: 4-pin mini XLR Cable entry: dual Cable: 2.5m with 6.3mm TRS plug Driver size: 80mm diameter, active area 65mm x 50mm Max power rating: 15W (< 200ms) Max. S.P.L. > 130dB Impedance: 115 Ω (older versions are 45 Ω) Efficiency: 96dB/1mW (105dB/V) older version 84dB/1mW (97dB/V) Weight: 540 g. Clamping force: Medium Accessories: 3.5mm TRS to 6.3mm TRS converter, ruggedized travel case Photos:
  6. Item: ALO Continental Dual Mono Headphone Amp & DAC Location: Adelaide Price: $850 Item Condition: Mint in original packaging Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition, used infrequently and battery always kept charged. Legendary performance. Comes with original box and accessories including charger, USB cable, booklet, rubber strap bands for stacking with other devices, international power adaptors. Upgraded to Mullard 6021 and Sonotube tubes (great improvement over stock tubes). At the front: 3.5mm single ended headphone output; 5 LED sample rate indicator for DSD64 (white), 88.2kHz/96kHz (blue), 176.4kHz/192kHz (green) and 44.1/48kHz (red); a volume potentiometer (also serves as on/off switch); power LED indicator; high and low gain switch and 2.5mm balanced headphone output. At the rear: 3.5mm fixed 2Vrms analog output signal (straight from DAC); power/charging connection; micro USB digital input; input switch allowing you to choose from digital or analog input sources; a 2.5mm balanced input; and a 3.5mm single ended input. Dimensions: 145mm x 25mm x 82mm / 5.75″ x 1″ x 3.25″ RMS per channel, both channels driven: Single Ended: 80mW into 32 ohms 95mW into 50 ohms 75mW into 150 ohms 60mW into 300 ohms Balanced: 125mW into 32 ohms 145mW into 50 ohms 110mW into 150 ohms 95mW into 300 ohms Input impedance SE: 10k Input impedance BAL: 50k Output impedance SE and BAL: < 1 Ohm Photos:
  7. Item: AudioQuest CinemaQuest YIQ-3 Component Video Cable 2m Length Location: Adelaide Price: $80 Item Condition: Mint Reason for selling: Unused Payment Method: Pickup, Cash, EFT, Paypal (buyer pays postage and any transaction fees) Extra Info: Purchased new from authorised AudioQuest dealer. Second from the top model from AudioQuest. Component video provides a significantly better picture than other analog connections, like composite or S-video. Its greater color bandwidth results in clearer color reproduction with less bleeding. AudioQuest's YIQ-3 delivers sharp detail and accurate, lifelike colors from your video source. CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S- video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating. YIQ-3 uses a 6.1% Silver Center Conductor (6.1% SPC) insulated with Hard Cell Foam (HCF). Normal 1.25% silver-plate greatly improves high frequency performance for a fraction of the cost of solid silver. A 6.1% silver conductor is much closer to all silver, still for a fraction of the cost. Nitrogen Injected HCF reduces distortion caused by the insulating material. The combination Copper foil and Silver- Plated braid shield provides 100% protection coverage and lower distortion. Gold-Plated RCA, BNC or D- Sub 15 connectors are professionally attached with superior AudioQuest solder. Photos:
  8. Item: Ayre Acoustics Myrtle Isolation Blocks / Footers Location: Adelaide Price: $SOLD Item Condition: Mint / unused Reason for selling: Not being used Payment Method: Pickup, Cash, EFT, Paypal (buyer pays all transaction fees and postage) Extra Info: Purchased from authorised Ayre dealer. Used in main set up and headphone rig. 16 solid blocks available (for under components) 6 single notch blocks available (for cables) Maximize the performance of any audio component or cable with the Ayre myrtle wood blocks. Slightly taller than the original feet on Ayre equipment, they are designed to be placed directly between the chassis of any audio component and its support shelf. The notched blocks provide isolation for interconnects, speaker cables or power cords. You’ll be captivated with the improved musicality these wood blocks provide. Photos: .
  9. Item: Nordost Hemidall 2 Headphone Cable for Audeze 2m Location: Adelaide Price: $SOLD Item Condition: Mint Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT, Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition, locally purchased headphone cables with balanced 4-pin XLR connection with both 6.5 and 3.25mm jack. One of the best headphone cables on the market and a massive improvement on stock cables. Used infrequently for dedicated head-fi rig. Photos:
  10. Item: Nordost Hemidall 2 Australian Power Cable 1m Location: Adelaide Price: $SOLD Item Condition: Mint in original box Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT, Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition, locally purchased power cable with Australian Furutech 15A plug. Used infrequently for dedicated head-fi rig. Comes with original box, warranty card and user manual. Photos:
  11. Item: Audeze LCD-3F Fazor Headphones in Case Location: Adelaide Price: $1500 Item Condition: Mint in original case Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT, Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition in original case with cables, user manual, certificate of authenticity and warranty card. Originally purchased from Addicted to Audio in Melbourne. Cables include 4-pin XLR connection and both 6.5 and 3.25mm jacks. The Audeze LCD-3 provides the highest level of audio quality, unsurpassed bass extension, exceptional treble and the best mid-range you will find in headphones. Type: Over ear, open Driver type: orthodynamic with Fazors Pads: Lambskin leather or micro-suede Foldable: No Headphone connector: 4-pin mini XLR Cable entry: dual Cable: 2.5m with 6.3mm TRS plug Driver size: 80mm diameter, active area 65mm x 50mm Max power rating: 15W (< 200ms) Max. S.P.L. > 130dB Impedance: 115 Ω (older versions are 45 Ω) Efficiency: 96dB/1mW (105dB/V) older version 84dB/1mW (97dB/V) Weight: 540 g. Clamping force: Medium Accessories: 3.5mm TRS to 6.3mm TRS converter, ruggedized travel case Photos:
  12. Item: ALO Continental Dual Mono Headphone Amp & DAC Location: Adelaide Price: $900 Item Condition: Mint in original packaging Reason for selling: Selling headphone rig Payment Method: Pickup, Cash, EFT Paypal (buyer pays all transaction fees and postage) Extra Info: Mint condition, used infrequently and battery always kept charged. Legendary performance. Comes with original box and accessories including charger, USB cable, booklet, rubber strap bands for stacking with other devices, international power adaptors. Upgraded to Mullard 6021 and Sonotube tubes (great improvement over stock tubes). At the front: 3.5mm single ended headphone output; 5 LED sample rate indicator for DSD64 (white), 88.2kHz/96kHz (blue), 176.4kHz/192kHz (green) and 44.1/48kHz (red); a volume potentiometer (also serves as on/off switch); power LED indicator; high and low gain switch and 2.5mm balanced headphone output. At the rear: 3.5mm fixed 2Vrms analog output signal (straight from DAC); power/charging connection; micro USB digital input; input switch allowing you to choose from digital or analog input sources; a 2.5mm balanced input; and a 3.5mm single ended input. Dimensions: 145mm x 25mm x 82mm / 5.75″ x 1″ x 3.25″ RMS per channel, both channels driven: Single Ended: 80mW into 32 ohms 95mW into 50 ohms 75mW into 150 ohms 60mW into 300 ohms Balanced: 125mW into 32 ohms 145mW into 50 ohms 110mW into 150 ohms 95mW into 300 ohms Input impedance SE: 10k Input impedance BAL: 50k Output impedance SE and BAL: < 1 Ohm Photos:
  13. Item: Little Dot Mk II Headphone Amplifier Location: Adelaide Price: $SOLD Item Condition: Mint Reason for selling: Selling head-fi rig Payment Method: Pickup, EFT, Cash, Paypal (buyer pays all transaction fees & postage) Extra Info: Great condition and one of the best value headphone amplifiers available. Australian variant with 220v power supply. Upgraded Value Electronic CV4010 KQDD/K and 6H6 VIII tubes. The device has a single volume knob on the front along with a blue LED and of course, the 6.3mm port. At the back you can find the input and output RCA pots as well as the power button. The specifications of the amp are as follows: Input: Gold-Plated Unbalanced Phono (RCA) Jacks Output: 1/4" Gold-Plated Stereo Headphone out Driver Tubes: 6JI Power Tubes: 6N6 Frequency Response: 20HZ - 50KHz (-1dB) THD+N: 0.1% (50mW into 300 ohms) Suitable Headphone Impedance: 32 - 600 ohms Pre-Amplifier Output Impedance: 10K ohms Power Output: 300mW into 300 ohms 200mW into 120 ohms 100mW into 32 ohms Average Power Usage: 28 watts Dimensions: 210mm (length) by 110mm (width) by 130mm (height) Weight: 2.5 kg or 5.5 lbs. The Little Dot MK II boasts a SEPP (single ended push pull) circuit (in similar vein to the rest of the MK-series tube amplifiers) greatly increases sound quality, dynamic range, output impedance, and harmonic distortion. The Little Dot MK II also provides gain control of 3, 5, and 10 via internal DIP switches for fine-tuning so you can maximize synergy with almost any headphone you have, whether it be 32 ohms or 600. Some cheap tube amps have what is called a hybrid design, where the power is provided by a transistor based circuit and the driver circuitry is tube based. Examples of these designs are the headphone amps with only a single vacuum tube (the driver tube). Not only does the Little Dot MK II have a fully tube based design (both power and driver elements are tube based) it actually has independent circuitry for the left and right channels. So essentially, you have 1 power tube and 1 driver tube for the left channel and 1 power tube and 1 driver tube for the right channel. This is called an SEPP design (think of it as 2 + 2 design). Photos:
  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
×
×
  • Create New...