Jump to content

Z2TT

Members
  • Content Count

    117
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Z2TT

  • Rank
    Member

Profile Fields

  • Location
    Perth
  1. Trace the TV Antenna coaxial cable from the aerial to it's splitter and ensure it's connected to the point, be it your Foxtel point or whatever
  2. I don't dabble much into the On Demand TV even though I install a lot of TV Antennas as part of my job, but good to see SBS has On Demand as there is quite a few good programs there
  3. You have two options here to get TV Antenna reception to that Foxtel point. You could install a Diplexer in the roof and connect the digital TV aerial to that Diplexer so it can feed both Foxtel and TV signal there. Alternatively (not in your case), if you ever see the need not to use Foxtel, you could cut one of the coax cables from the Foxtel and connect it to your TV Antenna.
  4. What you need to do is install a mains powered masthead amplifier in the roof, that way tennants removing power packs will not affect other properties on that TV Antenna system. I had this issue in one TV Antenna installation in Perth that I did.
  5. If this conduit is not replaceable and inside the concrete, you might like to think twice about pulling new cable through it. Normally RG59 compared to RG6 coaxial cable can be no problem so long as you have a decent signal, you would like to find out what may be causing your TV reception issue first such as the amount of signal being received at the TV Antenna outside
  6. Do you have a picture of which TV Antenna you are using and what direction is it pointed to?
  7. Belinda you need a cable with PAL Male connectors on both ends, so that would be your "IS IT THIS" Photo. Given that your TV Antenna is in good condition and the wallplate is not loose, you should have no issues. I assume you are having trouble finding the correct cable to use for that wallplate ? I might add by the way, very good graphic you've made there.
  8. Nice one and good troubleshooting steps. Yes interference can be a very annoying issue.
  9. Buy a brand new signal lead and plug it right from the wall, directly to your PVR. See what that does.
  10. Item: DT1770 Location: Perth. Price: $700 Item Condition: Used few times, excellent condition Reason for selling: Not required. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Selling my DT1770's, one of the best Headphones I've heard in it's league. Purchased brand new from Headphonic and still has Beyer Aust Warranty. $700 or make an offer on Ebay : http://www.ebay.com.au/itm/Beyerdynamic-DT1770-Pro-/152441124431? Pictures: http://i64.tinypic.com/2zsv9fn.jpg
  11. There is barely any HD content anyway, I remember when HD was a big thing all the stations began pumping out 1080 content everywhere and then it died down, quite a scam if you ask me when we have all these modern high definition TV's and cant watch anything nice on them unless we buy DVD Movies or pay for Foxtel.
  12. Quite sad that we'll be losing the West TV here in Perth.
  13. You most likely have a poor quality signal arriving at your TV, get a technician out to identify and fix the fault.
  14. Wow, I think he got you there alanh, you did indeed claim no interference comes from a battery powered LED torch
×
×
  • Create New...