Jump to content

Sam68

Members
  • Content Count

    279
  • Joined

  • Last visited

Community Reputation

54 Good

4 Followers

About Sam68

  • Rank
    Member

Profile Fields

  • Location
    Melbourne
  • Country
    Australia

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Further information: Perfect condition for its age. Never been touched. One owner from new. Used only for vinyl and a little bit of radio, smoke free environment. https://www.hifiengine.com/manual_library/marantz/1120.shtml
  2. Further information: Audiophile grade router Was recommemded for my HD music streaming by my melbourne dealer.
  3. Hifiguru do awesome hardwood plinths from 1200 bucks. Www.hifiguru.com.au
  4. I have a Luxul XWR 1750. Its a specialist router i used for my Hifi streaming before i got something bigger. Its like new in original packaging. They were about 400 new you can have it for 80 dollars if it suits your needs
  5. These are awesome!
  6. Neo turntable PSU The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy. The Neo PSU is compatible with the following Rega turntable models: P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v motor upgrade kit. http://www.rega.co.uk/neo-turntable-psu.html
  7. Hi, the cartridge is listed seperately, low hours probably around 100. Can be packaged together.
  8. The new Power Oval 2 MKII has a new braid design on the shield and the size has increased to 10 gauge. According to literature, transient noise voltages in power distribution systems are produced by sudden changes in current demand. A low impedance transmission line design, such as that used by Analysis Plus Power Cord Oval cable, is recommended to minimize this noise. The current carrying conductors are then surrounded with a shield to prevent pick-up of high frequency noise. When people design power cords they use massive cable to reduce the noise voltage on the cable. The noise voltage that occurs on the cable is related to L (inductance) and di/dt (the rate of change in the current). You can reduce L by using larger gauge wire but you don’t get much bang for your buck because it is a log function. What this means is that as you keep increasing the gauge of the wire you do not get much improvement for your effort. This is why you see people using very heavy and stiff wires in power cords. What we have done at Analysis Plus is use computer simulation to optimize the design of a power distribution system. What we discovered is that our patented hollow oval design provides a low L cable without having to use stiff and bulky cables. Our cables have a super low noise voltage to reduce the background noise to a minimum. This is extremely important during quiet passages, if you want to hear subtle details (this is very important for classical music fans and for other lovers of live music).The other thing people don’t realize about low frequency noise is that the thin aluminum shield found on many power cords does nothing to reduce this problem. The best way to reduce low frequency noise on cables is to reduce loop area. From our computer simulation and measurements we found our patented hollow oval cables does a great job at this. We have the lowest noise voltage we have seen with our hollow oval design.For higher frequencies our silver-plated copper braided shield does a great job. We used an open braid design that works much like the window on your microwave oven. You can see through the window but the radiation stays where it belongs. Terminated with WattGate connectors, this power cable is engineered to deliver your audio/video components the clean power they deserve. Can be terminated with 20 amp IEC instead of 15 amp.
  9. Like new Original Packaging for safe transport with my freight company $35 Aus wide all metro areas Cartridge sold separately but can be packaged together Demo's welcome for local (Adelaide) buyers happy to include a professional cartridge setup in the sale either your own or I have many to choose from. Thanks for looking! https://www.whathifi.com/au/rega/rp3elys2/review Any questions please ask
  10. Output voltage at 1 kHz 5 cm/sec - 0.5 mV Channel balance - < 1.5 dB Channel separation at 1 kHz - > 21 dB Channel separation at 15 kHz - > 14 dB Frequency range at -3 dB - 20 - 25.000Hz Frequency response 20-20.000 Hz - +/-2.5 dB Tracking ability at 315 Hz at recommended tracking force *) - 65 μm Compliance, dynamic, lateral - 15 μm/mN Stylus type - Elliptical Stylus tip radius - r/R 8/18 μm Tracking force range - 2.1-2.5 g (21-25 mN) Tracking force recommended - 2.3 g (23 mN) Tracking angle - 20º Internal impedance, DC resistance - 7 Ohm Recommended load impedance - >20 Ohm Cartridge body material - ABS/Aluminium Coil wire material - Copper Cartridge colour - Red Cartridge weight - 9 g *) Typical value
  11. Hi I have an Analysis Plus power oval 2 power cable with is plug it's brand new the rrp is 1400 id sell it for 750 plus postage.
  12. Hi i have a brand new isotek Polaris power board you can have for 450 plus postage.
  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
×
×
  • Create New...