OMG Chord. Stop it! Hugo 2 Announced
Chord Electronics has used the Consumer Electronics Show in Las Vegas to unveil three brand new products for 2017. Is there any stopping John Franks and his relentless pursuit redefining HiFi and portable audio?
Unveiled at an exclusive presentation just hours ago, first up is the Hugo 2, "revolutionising Chord Electronics' game-chaning debut portable DAC/amp".
Sadly, StereoNET is not at CES, so we're relying on the press releases and expletives coming thorugh as text messages from those that are fortunate enough to be present.
Said to be a dramatically redesigned version of the now legendary Hugo, it features all new casework, new features and of course, "next-generation technical and sonic performance".
Franks said that recent advances in digital technology allowed htem to introduce what is the next generation of everything that was learned and experienced with the original Hugo.
Casework is reported to be a sharper, lower profile design, with the introduction of four spherical top mounted control buttons. These control power, input, filtering and crossfeed functions. Chord have recognised Hugo, while originally intended as a portable device, found its way into many HiFi systems. They now include a full function remote control.
The latest FPGA and advanced WTA (Watts Transient Aligned) filters have been implemented in the Hugo 2, bringing a wide variety of performance improvements in a number of areas. Performance gains have been made in timing accuracy, noise reduction, headphone amp power and dynamic range.
Inputs include optical, coaxial and HD USB, along with Bluetooth. Hugo 2 supports playback up to 768kHz and DSD512 via HD USB. Analog outputs include line-level RCA, 3.5mm and 6.35mm headphone outputs.
Other features remain much the same, however battery life has been reported to be improved. Playing time is around 7 hours with two modes of automatic charging included.
- 1x Optical TOSLink 24-bit/192kHz-capable
- 1x RCA coaxial input 24-bit/384kHz-capable
- 1x HD USB input 32-bit/768kHz and DSD512-capable
- 1x aptX Bluetooth (extended range)
- 1x 3.5mm headphone jack
- 1x 6.35mm (1/4 inch) headphone jack
- 1x (pair) stereo RCA phono output
- Frequency response: 20Hz – 20kHz +/- 0.2dB
- Total Harmonic Distortion: <0.0001% 1kHz 3V RMS 300 ohms
- THD and noise at 3V RMS Ref 5.3V: 120dB @ 1kHz 300 ohms A Wt
- Noise 2.6 uV A Wt: no measurable noise floor modulation
- Signal to noise ratio: 126dB A-weighted
- Channel separation: 135dB @ 1kHz 300 ohms
- Maximum output level (to clipping at 1% distortion): 94 mW 300 ohms; 740 mW 33 ohms; 1050 mW (8)
- Output impedance: 25 milliohms (0.025 ohms)
- Advanced digital volume control
- Crossfeed filter network
- Four-stage frequency-shaping filter
- Fast-charging batteries via Micro USB giving around 7 hours operation
- 49,195K tap-length filter (near double the original the Hugo)
Chord Electronics is distributed in Australia by Radiance Audio Visual. Hugo 2 will be available "early 2017". Local pricing has not yet been confirmed, but it will sell for £1,800 in the U.K.
Stay tuned for more Chord Electronics news.
StereoNET's Founder & Publisher and still buried deep in the review room auditioning everything from docks to soundbars, amplifiers to headphones. Marc also founded Melbourne's International HiFi Show.
MORE ON STEREONET
vOne needs only spend a few minutes with Roy to understand he's not one for big dollar mark-ups, unnecessary...
You have to hand it to NAD, they haven't sat around reminiscing of the glory days of HiFi. The days where the...
At 50 cents an hour of playtime, can this affordable Japanese cartridge from Hana be a worthy addition to an...
The AVID HiFi Ingenium is quite simply the little turntable that could. The entry level from the U.K...
From Finland to Australia and recording studios around the world, Amphion is now available locally thanks to...