Kundalini Posted December 20, 2014 Share Posted December 20, 2014 For Sale! Rotel RMB-1095 (1000W RMS, 5Ch.Amp) + Rotel RSP-1066 (7.2 surround preamp-processor & HT audio-video receiver) Price: $1,750 guide for BOTHItem Condition: Very goodReason for selling: See belowPayment Method: Pickup - Cash, Paypal, EFT once clearing my account - COD OnlyExtra Info: I strongly prefer to sell BOTH these in a single sale, as they have a wonderful synergy together & I want to keep the sale straightforward. Selling because way too powerful for my tiny home, especially since the arrival of our first child! This is a SERIOUSLY POWERFUL audiophile quality amplifier and pre-pro which deserves a home where it can be unleashed in all it's incredibly high fidelity (low THD, high SNR) power. American quality you would expect from the highly respected Rotel!Both in excellent fully working condition, including original heavy-duty packaging, manuals & remote control. I have recently had this unit cleaned, serviced & electrically inspected. Note this is a USA powered model so will require a transformer to use in Australia. You can buy an one here for approx $150 (eg http://www.tortech.com.au/step-down-transformer-australia/usa-step-down-transformer/1000w-transformer-economy-step-down). Have already taken $200 off my asking price to allow for transformer cost to buyer!Rotel RMB-1095 (1000W RMS, 5Ch.Amp):(Brand new RRP in 2003 was US $2000)You won't find many of these on the market anywhere in the world because they are so good that people hold onto them & snap them up when offered for sale. EVERYWHERE you look your will find OUTSTANDING reviews of this amp - here are some examples:* http://www.audioreview.com/cat/amplification/amplifiers/rotel/rmb-1095/prd_123774_1583crx.aspx* http://www.excelsis.com/1.0/entry.php?sectionid=16&entryid=33* http://www.audioholics.com/amplifier-reviews/rotel-rmb-1095* What Hi*Fi gave the RMB-1095 a FULL 5 stars!Here is the official product page with all the important details + more reviews:http://www.rotel.com/NA/products/ProductDetails.htm?Id=2&Tab=1&Pic=1200 Watts RMS output/Channel into 8 Ohms, all Channels Driven, 20 Hz - 20 kHzTwo Rotel toroidal transformers · Balanced and unbalanced inputs · British slit foil capacitorsTHD: < 0.03%Frequency Response: 15Hz - 100kHz +0.5dB, -3dBSignal to Noise Ratio: 116dBMFR: 15 Hz - 100 kHz +0.5 - 3 dBDimensions (W x H x D): 432 x 237 x 410 mmWeight: 34kg (that should give you an idea of the build quality!)Use all 5-channels for an incredible, immersive multi-channel experience, or use 4 channels in a quasi-bi-amp configuration to drive difficult speakers. Each amplifier channel has both an RCA unbalanced input and an XLR balanced input for audiophile quality signal input.The 1095 performs well with demanding speakers & difficult loads. The sound is smooth & never harsh, even at very loud volume. It has a slightly laid back high end, which is very appealing, since not only are many movie sound tracks relatively bright, but many CDs & digital files are as well. Regardless of how sibilant voices are in the source, the 1095 handles them with ease. Rotel has taken into account the probability that the consumer will listen at quite loud volume, so their laid back high end characteristic makes high volume more tolerable.Rotel came into the high power amplifier arena late, so they had to keep the price lower & performance higher than other audiophile models to break into that category - this unit outcompetes many higher priced ones from the same era (circa. 2000).Rotel RSP-1066 (7.2 surround preamp-processor & HT audio-video receiver):(Brand new RRP in 2003 was US $1500)http://www.rotel.com/content/manuals/rsp1066_eng_spa_fre.pdfSpecifications:AUDIO:THD <0.05%Frequency Response10 Hz - 95 kHz, ±1 dB (line level)10 Hz - 20 kHz, ±0.3 dB (digital level)SNR: 95 dB (Stereo) Analog / 92 dB (Dolby Digital, Dolby Pro Logic II, DTS) 0dBFsInput Sensitivity/ImpedanceLine Level: 200 mV/47 kohmsTone Controls (Bass/Treble): ±8 dB at 100 Hz/10 kHzPreamp Output Level: 1.2 V (200 mV Input)VIDEO:Frequency Response:3 Hz – 10 MHz, ± 3 dBSNR:45 dBInput/Output Impedance:75 ohmsOutput Level: 1 voltGENERAL:Power Consumption: 40 wattsPower Requirements (AC): 115 volts, 60Hz (USA version)Weight: 7.6 KgDimensions (W x H x D): 432 x 121 x 341 mmFront Panel Height: 109 mm Link to comment Share on other sites More sharing options...
ONBEER Posted May 9, 2015 Share Posted May 9, 2015 Did the amp ever sell mate? Link to comment Share on other sites More sharing options...
Kundalini Posted June 17, 2015 Author Share Posted June 17, 2015 Hi Rob / Onbeer - sorry mate I sold this a few months ago. Couldn't see how to delete the listing - any ideas? Link to comment Share on other sites More sharing options...
Ancientflatulence Posted June 17, 2015 Share Posted June 17, 2015 @@Kundalini This will tell you what to do ...... http://www.stereo.net.au/forums/index.php?/topic/73625-congratulations-now-please-report-item-sold/ 1 Link to comment Share on other sites More sharing options...
Kundalini Posted June 17, 2015 Author Share Posted June 17, 2015 (edited) Thanks Ancientflatulence Done! Edited June 17, 2015 by Kundalini Link to comment Share on other sites More sharing options...
Administrator Marc Posted June 17, 2015 Administrator Share Posted June 17, 2015 Congratulations on the sale of your item. If you feel you have benefited from using this system for the sale of an item through our classifieds system then please consider making a donation. Donation Payment Options You can make a donation via Paypal (using Credit Card or Paypal Balance), or Direct Deposit. Click below to make a donation: Thank you, your support is appreciated and every dollar makes a difference. Link to comment Share on other sites More sharing options...
Recommended Posts